How to Unlock the iPhone 4, 3GS, 3G Using UltraSn0w
Posted 3 years ago - 3714582 views - 1341 comments
ADD COMMENT
ribas
posted 1 week ago
nao funcionou, fiz como foi ensinado. did not work, as I was taught.
JoeKovalsky
posted 1 month ago
visit: http://ios-unlocker.com/ this is FREE way to unlock iDevice ;-) for: -iPhone2g -iPhone3g -iPhone3gs -iPhone4 -iPhone4s -iPhone5 -iPhone5s iPhone with iOS 3.1.3 to 7.1.1
bob
posted 1 month ago
Nope, still "searching". :(
iuhoosiers
posted 1 month ago
I get the same message... "Searching..."
Huy
posted 1 month ago
Cam on ban rat nhieu
rosh72
posted 2 months ago
how to unlock iphone 4 32 gb ios 5.1.1 baseband 4.12.01 japansoft carrier
dundas
posted 3 months ago
I can't seem to figure out how to unlock my phone. I have 3gs with 6.1.6 modern firmware 5.16.08 I have jailbreak with redsn0w Installed Ultrasn0w I am stuck on "No service" Ive tried so many things I cant figure it out.
Riz
posted 1 month ago
I am also having the same problem, were you able to fix it ? if yes, how ?
Kash_M
posted 4 months ago
Download the easy and simple iPhone Unlock Code generator application from HERE. I used it to unlock my iPhone connected to my computer in just a few minutes. Do not waste your money and visit http://bitly.com/12pfr9y to unlock your any model iPhone without paying anything at all.
babygal
posted 3 months ago
YOu can also unlock iPhone using remote unlocking method, you can get this service from any vendors online like TheUnlockSpot.com
baha
posted 4 months ago
u can unlock your iphone here http://smartunlocks.net realy cheap prices :)
earnfastmoney
posted 4 months ago
WE HAVE ALL TYPES OF FIRMWARE CODES, OR MEID or PASSWORD,(also latest cdma/modems Tools/Softwares) WANT TO CONTACT : - earnmoney9022@gmail.com Pay ONLY___1$ for code FIRMWARE/MEID through paypal :- earnmoney9022@gmail.com OR webmoney :- wmz- Z989755932103 and send me Model network imei with Transaction, in CONTACT NOW :- earnmoney9022@gmail.com to get the unlock code of ALL router/modems...... THANK YOU,
sinha
posted 4 months ago
nice sharing.
itaym1
posted 4 months ago
http://www.rapidunlockers.com/ Great site for permanent factory unlocks - sim free your mobile phone. It is the cheapest one i found, give it a try..
huy0979
posted 4 months ago
Does this work on a Iphone4s?
Leandro Salazar
posted 4 months ago
no, this metod doesn't work for iphone 4s.....
Logan
posted 4 months ago
iPhone 3GS Version: 6.1.6 Modem firmware: 06.15 Install cydia ultrasn0w install finish... No service... How? Please help?
nomad
posted 4 months ago
uninstall ultrasn0w, use redsn0w to downgrade from ipad baseband, that should bring you to baseband 5.13.0 or something like that, then install ultrasn0w again, good luck
nomad
posted 4 months ago
correction : that should bring you to baseband 5.13.04 , i just tried it today
yrubin07
posted 2 months ago
@nomad I tried downgrading and it gets stuck on the white text on screen part doesn't even get to flashing baseband
yrubin07
posted 2 months ago
@nomad I tried downgrading and it gets stuck on the white text on screen part doesn't even get to flashing baseband
danleygg99
posted 4 months ago
Hey guys, want to unlock ATT devices? You can check out ATTiphoneunlocking, its the site i have been using for years to unlock my phone, it works pretty good
Thomas
posted 4 months ago
Just did the jailbreak on my 3G using the iClarified instructions, and included the iPad baseband when I did it. Worked fine, now jailbroken, and shows 06.15.00... but, when I try to run the above, when I click to install Ultrasn0w, I get "the requested modifications cannot be applied due to...' :S
vxr
posted 4 months ago
my iphone 4 basband is 4.12 how to downgrade to 4.10 ? 1.59 ?
sinha
posted 4 months ago
Nice information.There are lot of methods available to unlock iPhone.We can also get it unlock our iPhone safe and securely using Remote unlocking method from ProUnlocking.com This will be a permanent unlocking solution. Both upgrading and downgrading will not lock your iPhone again.This method does not require jailbreak.
sinha
posted 4 months ago
Nice information.
daoshi
posted 5 months ago
I have an iPhone 4s with iOS 7.0.4, I cannot down grade to 6.x or 5.x. After I tried the steps suggested, it comes with a message "SIM Not Valid". Anyone suggestion, ot it just doesn't work for 7.0.4? Thanks. Joseph
Duardinho
posted 5 months ago
Hi all! I've just jailbreaked my iphone and now tried to unlock it because I changed carrier... now, it keeps searching for the carrier and I cannot make any calls... any suggestion? I'm a bit "fresh" on this kind of matters. Thanks all
jag broncano
posted 6 months ago
Thanks you so much..
navin
posted 6 months ago
Free iphone unlocks @ http://www.freeunlock.us
Jimmy
posted 6 months ago
Worked at last. Thanks guys. Downgrading my baseband from 6.15 to 5.13.04 did the trick. I have 3Gs and updated it to 6.1.3. with iTunes, JB with redsnow, install Cydia, Ultrasnow, then p0sixspwn for untethered JB. Found everything OK, except it was still SIM locked. Did the baseband downgrade with Redsnow and right away I could call out. Thanks again.
Gaurav
posted 6 months ago
Thanks Iclarified. I got my phone unlocked. Now can i update my phone to ios 6.1.3 (currently on 4.1.1) without getting my phone locked again ?
Gaurav
posted 6 months ago
i have a second hand iphone 3gs with ios 4.1.1,bt whenever i try to update it to ios 6.1.3,the iphone gets locked...its annoying as i cannot use any apps...please tell me what to do..... thankyou
sinha
posted 5 months ago
You can unlock your iphone3GS using Remote unlocking method. Which is the safe and secure method to unlock iPhone. You can get this service from OnlineGSMUnlock.com here you need to specify your country, Network name to which it is locked, IMEI number of your iPhone. Here they unlock your iPhone using latest versions of iTunes. This is permanent unlocking solution. Both upgrading and downgrading will not lock your iPhone again.
Yo Man
posted 7 months ago
Does work great on iPhone 3G.Thank you guys!
sarah
posted 7 months ago
dose this work for i phone 4 runing on ios 7 in uk
Kunal Kumar
posted 7 months ago
excellent........God bless u all... worked on Iphone 3G..4.2.1...baseband 6.15.00...I watched and did what been told youtube...but YOU are the best...
Kash_M
posted 7 months ago
No need to worry it having trouble unlocking you iPhone (any model), just follow the simple instructions at this page and get your iPhone unlocked in less than 5 minutes and that as well completely free of cost.
phoneunlock.ml
posted 8 months ago
anyone looking to get theyre phone unlocked? i strongly suggest phoneunlock.ml its FREE :O i couldnt beleive it, i tried it with an old phone and was factory unlocked in minutes, i donated so i would be on top of the waiting list, but yeah thought you should know
Emo zaga
posted 8 months ago
Nevermind I got it working thanks alot..
Kwame
posted 8 months ago
Mine gives me a note that "the requested modifications cannot be applied due to required dependencies or conflicts that cannot be automatically found or fixed" can you please help me out
Peter
posted 8 months ago
Thanks Iclarified. It all worked as directed. I was already flipping before I stumbled upon your tutorial on how to downgrade base band 6.15 to 5.13 and install ultasn0w. Thanks again guyz, you are a life saver.
iAppleStuffs
posted 9 months ago
I am offering AT&T iPhone 5s,5c,5 & 4s factory Unlock Service for just 50usd. if your interested then you can email me or inbox me - iapplestuffs@gmail.com ! The iPhone will be unlocked in 1-36 hours. and it works in any IOS version, Thanks Link :http://iapplestuffs.blogspot.com/2013/10/factory-unlock-service-at-iphone-3g-3gs.html
itaymi
posted 9 months ago
http://www.rapidunlockers.com/ This is the Best site for mobile phones factory unlocks ( SIM Free ): Only 5$ for phone unlock
pwiggler
posted 10 months ago
I have followed this (and many others) tutorial to the letter and I cannot unlock my iphone 3gs. i'm on 6.1.3, baseband 05.13.05, jailbroken ok, cydia installed, sources entered, ultrasnow loaded fine, US fixer installed and it just still says no service and there is no 'carrier' section in settings to check? end of my flippin tether!! please help
JM
posted 9 months ago
I may be wrong, but I don't think ultrasnow works with 6.1.3 yet. That may be your problem. I believe it works on 6.1.2
pwiggler
posted 10 months ago
I have followed this (and many others) tutorial to the letter and I cannot unlock my iphone 3gs. i'm on 6.1.3, baseband 05.13.05, jailbroken ok, cydia installed, sources entered, ultrasnow loaded fine, US fixer installed and it just still says no service and there is no 'carrier' section in settings to check? end of my flippin tether!! please help
pwiggler
posted 10 months ago
I have followed this (and many others) tutorial to the letter and I cannot unlock my iphone. i'm on 6.1.3, baseband 05.13.05, jailbroken ok, cydia installed, sources entered, ultrasnow loaded fine, US fixer installed and it just still says no service and there is no 'carrier' section in settings to check? end of my flippin tether!! please help
shamim
posted 10 months ago
Thanks a lot........worked like a charm
Tj
posted 10 months ago
exellent
jhun
posted 10 months ago
hi! is there any way to open line / unlock my I phone4 ver. 4.2.1 w/ bb 03.10.01??? need help...btw I'm from Philippines. thanks
badz97
posted 10 months ago
you guys are amazing thanks you dev-team
Aubry
posted 11 months ago
i unlocked mine but not with this method and not the ime method too , i twited things and it worked though i dont know if it will with you and i did it on ios 6.1.3
Mahmoud
posted 10 months ago
so can you help me doing mine too ?
machella
posted 11 months ago
did this and it still keeps searching....
Akushika
posted 10 months ago
Wenas, Ruben, me referia a que timoff3noca creo enentder que tiene el wifi capado solo para usarse con redes wifi de su empresa. Te lo digo xq estuve en andorra i al encontrar una sef1al wifi libre, me intente9 conectar i me salio una ventana diciendome lo de la itinerancia de datos i que posiblemente esa conexion tendria algun coste.
redsubmarine
posted 11 months ago
If any of you guys want to unlock phones locked to AT&T, go google attiphoneunlocking, took me about 2 hours to unlock my 5
machellalie
posted 12 months ago
it still gives me no service after searching ? what do I do? I have 06.15.00 and 6.1.3 firmware. I have tried this so many times. I have the ultrasn0w installed erything. its still searching and theng goes into no service
MoDyOsama
posted 11 months ago
try downgrading your baseband :/
hannah889q
posted 12 months ago
I personally think attiphoneunlocking is the best unlocking site for all AT&T stuff, go check it out if you are having trouble unlocking your AT&T phones
Liover
posted 12 months ago
no me funcioni y segui todo al pie de la letra temgo un iphone 3G q agooo ayudame
Nariel
posted 11 months ago
1) Quality content (blogging): Perhaps the most ianrotmpt element of this entire list. Google has even adjusted itself to not penalize websites that don't know very much about SEO, and subsequently don't follow #2 below, but produce top notch articles. Google is doing a better job of determining the quality of an article, and whether or not the content has been duplicated. You need to have a blog and you need to be using it to produce quality articles at least a few times a month, if not more. Here are some tips for writing quality blog articles for your medical practice.
innovative
posted 5 months ago
I would like to share my unlocking experience here . I used O2 UK Apple iPhone Unlocking Service to unlock my iPhone 4 from carrier lock . i got it from the provider SuperUnlockCodes.com
carolia
posted 1 year ago
If you are having trouble unlocking your ATT stuff, you can unlock it using attiphoneunlocking, I have unlocked two of my phones alreday
twotees
posted 1 year ago
when cydia has the 2 sign as shown in step 14, does it mean the phone has been unlocked?
Timmy
posted 1 year ago
thank you guys. The control freaks from Apple and AT&T will never be able to keep up with you!
praveengowdadm
posted 1 year ago
Yes it worked but after restarting it will show no service again and cydia will also not opening
twotees
posted 1 year ago
same thing happenened to me cydia has the 2 sign attached but it is not opening. please assist.
praveengowdadm
posted 1 year ago
Man, v have to live with problem till some one find solution for this. now our phone is tethered and there is no untethered jailbreak for ios 6.1.3 so we need wait for untethered jailbreak release. i ll update if i find any other way.
warren
posted 1 year ago
Regarding the usage of iphone, I believe unlocking is more important than jailbreak, as for my ATT 4s, I have to unlock it through the carrier, but I found these sites on google that does it for a price way lower than ATT's contract, so I picked the first result after google attiphoneunlocking, and I have it unlocked in couple hours.
nicole
posted 1 year ago
After following each step outlined in the tutorial, i am still unable to use my iphone as it says no service, instead of the provider i'd like to use my phone with. Is there anyway I could get some help with having it fully/completely successful with the unlock
bertbert
posted 1 year ago
If still no service remove/uninstall the ultrasnow fixer guys.this works for me-bertbert123
raul
posted 1 year ago
Can you give me more details? I just got the iPhone. Just got it jailbroken and installed successfully everything from this tutorial but still no service. thanks
shahfahad
posted 1 year ago
its not working in pakistan.......
Anonymous
posted 1 year ago
My iphone 3gs says it is no service even it is have a sim card inserted , this happen after i upgrade my iphone 3gs ios 4.1 to ios 5.1.1 and jailbreak it using redsnow , some says i have to install ultrasnow but my baseband is not applicable which is 5.16.05 , so i search until i found that i have to install ipad baseband , I have a new bootrom with serial number 87950..... , should i proceed ? i remember that i have the 6.15 baseband in the past but i dont know why it become 5.16.o5
kim enriquez
posted 1 year ago
Hi , I upgrade my iphone 3gs new br from ios 4.1 to ios 5.1.1 using redsnow and i also jailbreak it using redsnow , but my iphone has showing no service even i inserted a sim , someone told me to downgrade my modem firmware , so i downgrade it from 6.15.00 to 05.14.02 but it still doesnt work , it still has no service , Somenone please help me , what should i do ? sorry for my bad english , btw im from philippines
sRad
posted 1 year ago
Thanks bro!!! You saved my iPhone!!! =D
Riz Raz
posted 1 year ago
Hello, Ive been using a jailbroken & carrier unlocked iphone 3g..(in another country from where i bought it)...was working fine..But recently all the apps stopped working (except for the built in apple apps and the apps i downloaded after unlocking)..i guess this happened after a sync with itunes..Hence i couldnt identify the base band following your instruction.. Then i updated the OS using iTunes in the usual way... Now the iTunes says its locked (SIM not supported) and in the handset theres nothing but a picture with a usb port and a iTunes logo.. Please help me to unlock this...please provide detailed info' as im new to this sort of things. thanks in advance..
Riz Raz
posted 1 year ago
Hello, Ive been using a jailbroken & carrier unlocked iphone 3g..(in another country from where i bought it)...was working fine..But recently all the apps stopped working (except for the built in apple apps and the apps i downloaded after unlocking)..i guess this happened after a sync with itunes..Hence i couldnt identify the base band following your instrusction.. Then i updated the OS using iTunes in the usual way... Now the iTunes says its locked (SIM not supported) and in the handset theres nothing but a picture with a usb port and a iTunes logo.. Please help me to unlock this...please provide detailed info' as im new to this sort of things. thanks in advance..
Riz Raz
posted 1 year ago
Hello, Ive been using a jailbroken & carrier unlocked iphone 3g..(in another country from where i bought it)...was working fine..But recently all the apps stopped working (except for the built in apple apps and the apps i downloaded after unlocking)..i guess this happened after a sync with itunes.. Then i updated the OS using iTunes in the usual way... Now the iTunes says its locked (SIM not supported) and in the handset theres nothing but a picture with a usb port and a iTunes logo.. Please help me to unlock this...please provide detailed info' as im new to this sort of things. thanks in advance..
innovative
posted 4 months ago
Well ! I used Optus Australia Apple iPhone Unlocking Service to unlock my iPhone 4 . I got it from the provider Unlock-zone.com
Peter Consul
posted 1 year ago
help! :( i got iphone 3Gs with base band 6.15.00 and it keeps on saying "No Service" even though i have installed ultrasnow, i just jailbroke it using Evasi0n 1.1 after jailbreaking, there, keeps on saying no service. please HELP! :(( ,PHILIPPINES!
kim enriquez
posted 1 year ago
Same problem bro , im also from philippines
digitally.4u
posted 1 year ago
after restore iphone 3gs firmware iPhone2,1_6.1.2_10B146_Restore If not activated just do as below - open redsn0w_win_0.9.15b3 Select 6.0 ipsw and make install ipad baseband (6.15) even though you are already on same baseband, just eflash it. not select install cydia after reboot phone is activated Now connect powered on phone to pc and run evasiOn 1.4 and press jailbreak It will make untethered your jailbreak. Now you need to unlock do as below.. install ultrasn0w 1.2.8 or download ultrasn0w 1.2.8 Deb files Run Ifunbox / iToools or any other file manager program in pc and connect iphone to pc. place the All DEB files in var/root/Media/Cydia/AutoInstall (If Cydia/AutoInstall dont exist, create these folders as posted) Reboot iPhone normally "twice" and it will be unlocked.
bifta236
posted 1 year ago
hi everyone i got my phone to work with ultrasn0w my iphone 3gs is now open to all networks using ios 6.1 firmware 5.13.04 i done this by downgrading to ios 4.1 jailbroke it and installed ipad baseband then after i completed that process i jailbroke it again using redsn0w and downgrading ipad baseband then after used snowbreeze to make a custom ipsw that does not update baseband to the new 6.1 when u have done that go to itunes shift and click then use the new ipsw snowbreeze made and update it then when done jailbreak using evasion then installed ultrasn0w 1.2.8 and it made mine work bit of a time consuming thing but mine works now and thought id let everyone know on here how i done it hope this helps
Muaz
posted 1 year ago
Do you have a new Boot rom or An Old Boot rom???
bifta236
posted 1 year ago
new boot rom
Patrick
posted 1 year ago
Does your method only works on 3gs?
Huginn
posted 1 year ago
what about for the new bootroms? I have: -Jailbroken custom IPSW from sn0wbreeze 6.1, BB 5.13.04 (by doing iTunes restore) upgraded from: -custom IPSW 4.1 (to preserve baseband) -followed the instructions above to the letter, reinstalled (Q'd) mobile substrate then reinstalled ultrasn0w 1.2.8. - I also installed evasi0n for untethered jailbreak for 6.1 - restarted *still not getting any signal!*
pratik
posted 1 year ago
Hello.. I'm in big trouble.. My iphone 3gs (new boot room) was wroking on ios 4.0.1. with BB 06.15.00 ..I upgraded it to 6.0.1 with BB and jail broke it but it was not able to detect sim. So i decided to downgraded to ios 5.0.1.. I successfully downgraded to it with BB 06.15.00 and installed ultrasn0w 1.2.7 but still problem was not resolved. SO i downgraded BB to 05.13.14 using redsn0w. i reinstall ultrasn0w and mobile substrate both. But Still it is showing NO SERVICE. I seriously dont know what to do ..please help.
didier
posted 1 year ago
@patrik did u install Ultrasnowfixer before ultrasnow? Are u sure u've got Ultrasnow 1.2.7? Because in Cydia, now there's 1.2.8 and it doesn't work with 3gs BB 05.13.04. I got the same issue when i updated ultrasnow 2 days ago, so i had to find Ultrasnow 1.2.7 and install it manually to get network working again.
pratik
posted 1 year ago
I installed ultrasn0w fixer later then ultrasn0w 1.2.7. Now it is updated to 1.2.8. previously i was on BB 06.15.00 and ultrasn0w 1.2.7. It didn't work..then i was on BB 06.15.00 ultrasn0w 1.2.8 then also i didn't get signals.. then i downgraded BB to 05.13.04..ultrasn0w 1.2.8 but it isn't working either.. I dont know what to do now? i reinstall ultrasn0w so many times but it isn't solving the problem.. should i upgraded to BB 06.15.00 again?
sharat
posted 1 year ago
how to unlock iphone 5?
Dave
posted 1 year ago
Excellent discription of how to Unlock iPhone 3G iOS 4.2.1 with 06.15.00 Modem firmware.....worked first time with no issues, Great job guy's A BIG Thanks to all concerned from Vancouver Western Canada!
bifta236
posted 1 year ago
is there going to be a upgrade for ultrasn0w fixer or ultrasn0w so it will work for the ios 6.1 untethered because when i tethered jailbreak it with a 6.15 baseband i put simcards in even the origional and it keeps saying no service after installing ultrasn0w fixer 6 first then ultrasnow followed by a tethered boot so know im stuck back on ios 4.1 because cant get back to ios 6.0.1 plzzz help
totika8
posted 1 year ago
Can i unlock my iphone 4 ios 6 baseband 04.12.02 locked to O2 UK????://
Patrick
posted 1 year ago
no release for iphone baseband 04.11.08 yet?
Ram
posted 1 year ago
Wonderful!!! You Guys save my 3G iPhone, many thaks, It worked just perfect... I really appreciate your work
umer
posted 1 year ago
how did you unlock your iphone 3g ??? can i install facebook on my iphone 3g having 4.2.1
Atinder
posted 1 year ago
i clicked on repo666.ultrasnow.com but ultrasnow didnot opened. what should i do? i hve inserted sim in my phone but still it phone says no service. it is iphone 3gs 5.1.1 jailbroken. plz help
Tufail Shahzad
posted 1 year ago
I have 3gs, just upgraded to IOS 6.0.1 just because of SHSH Blobs were only supporting 4.1, 4.2 and 6.0.1 I have installed 6.0.1 JailBreaked But, the issue is "No Service" I have installed latest version of UltraSn0w but no luck. Also, downgraded it's baseband from 6 to 05.13.04. I have wasted the whole day but no luck, can you guys help?
aj
posted 1 year ago
yow. will it work here in the phils? i cant get my iphone unlock because SAM method has already blocked by apple. any help guys? please i really do need your help. hoping for your kind consideration. thank you in advance :)
Austin
posted 1 year ago
I did this but i still cant get on the internet.
muaz
posted 1 year ago
Does it work on iPhone 3GS on iOS 5?
zafar
posted 1 year ago
how to unlock iphone 4 baseband 04.12.02? mobel num mcb603b version 5.1.1 (9b206) locked to o2 uk please mail me thanks
innovative
posted 1 month ago
zafar - January 9, 2013 at 5:49pm how to unlock iphone 4 baseband 04.12.02? mobel num mcb603b version 5.1.1 (9b206) locked to o2 uk please mail me thanks Its simple . Just buy O2 UK Apple iPhone Unlocking Service from the provider TheUnlockArena.com to unlock your iPhone 4 from carrier lock .
als
posted 1 year ago
I downgraded the baseband did the unlock but the phone stays in the searching network mode. It doesn't find a network. It the settings it still says 05.16.05. I am not sure if the downgrade is done or not. What should i do ?
JPM1234
posted 1 year ago
I have a jail broken 3GS running ios 4.1 for which I have downgraded the baseband back to 5.13.4. I am giving the phone away to my partner (who is not tech-savy) and who will be working away for a while, so I will not be able to help him. I would like to install it back to stock standard ios 6 and want to lose the jailbreak/unlock. If I just install ios 6 from iTunes now that I have Baseband 5.13.4 will this work?
Elvis
posted 1 year ago
Hello! can you please tell me how to unlock iphone 4 baseband 04.12.02? thank you
rehan
posted 1 year ago
Oh God , it's work on my iphone 3GS
Whynn
posted 1 year ago
Hi! Does the process work in Philippines also? Thank you!
ingo
posted 1 year ago
can anyone tell me if this actyually works?
Michael
posted 1 year ago
Oh yes, it's work on my iphone 3GS with baseband of 06.15.00 and unlock for any elco SIM card
AndreiRO
posted 1 year ago
Hello i have an iphone 4 ios 5.0.1 BB 04.11.08 locked on fido can u tell me if this will work?
Jason
posted 1 year ago
Does anyone know of an unlock for 04.12.01, iOS 5.1.1? If not, then a way to downgrade either? This was given to me, so I do not have any prior versions.
lisgrapci
posted 1 year ago
can some one tell me does this work on older version of ios such as 4.1 , 4.2 , 4.3 etc etc. in iphone 4 that is currently unlocked by a gevey sim ? help please !!!!
Kim
posted 1 year ago
i did everything and it's already unlock but the problem is whenever I call, the other line can't hear me.. what should i do?
Mohamed Aurangazib
posted 1 year ago
as a mobile technician... Am sure you are not in carrier problem(unlocked).. You have hardware problem - the mic of your phone.. To confirm check with your sound recording APP in your iPhone If you cont hear your recorded voice then get it to the service center
kim
posted 1 year ago
i just realized that i commented on a wrong thread. well anyway, I unlocked my iphone 4 4.11.08 using SAM, but the problem is whenever someone would call me and every time the call reaches 20 secs, the other line won't hear me then. I tried recording my voice and it didnt seem to have a problem with the mic. is there anyone who had the same problem with mine? can anybody help me?
innovative
posted 5 months ago
I used Optus Australia Apple iPhone Unlocking Service to unlock my iPhone 4 . I got it from the provider ClassicUnlocking.com to unlock it .
Brian
posted 1 year ago
I cant get step 8 to actually show up as a source. It does its thing for 5-7, then 8 shows nothing.
carpenter940
posted 1 year ago
I had that problem too. You have to hit SEARCH at the bottom of your screen and type in "ultrasn0w", at that point select it and install it.
bisla
posted 1 year ago
All the process was completed but my iphone 3G is searching the sim .What should i do any ideas?
anarki
posted 1 year ago
For iOS 6.X you also need ultrasn0w fixer: http://www.spiritjb.org/2012/11/unlock-ios-6.0.1-on-iphone-4-iphone-3gs-with-ultrasn0w-fixer.html iphone 3GS, 6.0.1, new BR, BB 05.13.04
MAKIS
posted 1 year ago
100% WORKING FOR GREECE THANKS
gaurav k sanoria
posted 1 year ago
gaurav k sanoria - its amazing and very transparent processs - its just make me rock!!!
Odeyinka
posted 1 year ago
you mean if you go to an apple store with a jailbroken phone and any other jaebrliak app, they will welcome u with open arms?thats whats it means illegal for us end users, nobody (practical) is gonna arrest you for doing anything with your phone, its a private property .
Andrew
posted 1 year ago
Would this work for AT
Asena
posted 1 year ago
As of this moment, I have 10 hard dreivs sitting on my desk and one other sitting beside me. 3 of them are my media dreivs. Well actually, in a way only one is. The other two are backups, one I just purchased so I can locate it off-sight. The other 6 are various backups of my computer and other computers.Apple has made it SO simple now. You just plug in a drive and it asks if you want to use it for backups you say 'yes' and it does the rest for you. Leave it plugged in, do it once a week, whatever.I just had two laptops stolen a few months back (right before the new laptops were released) and I happened to have started using backups only 6 months before. When I got the new laptops, just plugged those HDs in and a few hours later it was like I was back on my old machine. My wife had not been as diligent in keeping up with her backup, but she does it much more frequently now.
Daniel
posted 1 year ago
I'm grateful you made the post. It's celeard the air for me.
C Roma
posted 1 year ago
An AT
srdjan
posted 1 year ago
super
innovative
posted 4 months ago
There are a lot of techniques available to unlock iphone 4 : 1. By using unlocking software like cydia 2. Imei unlocking method 3. To unlock iphone from service provider 4. By using Remote unlocking service which is available at Unlocking4U.com
C Roma
posted 1 year ago
Can iPhone 3 be switched from an AT
Adityapd
posted 1 year ago
I upgraded my 3GS to ios 6 and JB baseband 05.13.04 but can't unlock since can't find Cydia on the springboard... can anyone help ?
FREOOY
posted 1 year ago
The only and better solution is an Official Factory Unlock... I can do it for you for a small fee pay by Paypal
Adityapd
posted 1 year ago
what is the fee ?
FREOOY
posted 1 year ago
Can you let me know ur email to talk in private about it.... Is just because advertise its not aloud in this site...my email is freooy@gmail.com
FREOOY
posted 1 year ago
26...
JustJBuser
posted 1 year ago
The lost unlock has been very excruciating for me though educational! I finally brought it to a factory unlocker in a local mall here in Davao City for P1,000 fee. It's done, service is back. The 3GS is on iOS6, still jailbroken, but Cydia won't run. Will another restore and redsn0w JB fix Cydia?
FREOOY
posted 1 year ago
Hey, I could help you to Factory Unlock any AT
Dragoniro
posted 1 year ago
Very thanks ;* Greetings from Poland
JustJBuser
posted 1 year ago
I am a fan of JB teams out there. Now it's first time to ask help. I have a jailbroken 3Gs, it was on iOS 4.0 and had not been upgraded since 2010 until last week, when I needed to use iCloud. I didn't researched, and using the latest redsn0w I tried upgrading to iOS 5 but without SHSH blobs it failed. Well, I ended up with backup and upgrade to iOS 6 via iTunes. I lost my unlock!!! I followed the guides I read from Dev Blog, here at iClarified, and via redsn0w I finally updated to baseband 06.15, still iOS 6, and following the above, installed ultrasn0w for unlock. Everything went smoothly, but upon inserting my Globe sim, it's sim failed and NO SERVICE. What will I do next? Please advise.
Geraldo
posted 1 year ago
from what I read from DevTeam, Ultrasn0w is not ios6-compatible yet. However, there is apparently a workaround called "Ultrasn0w fixer for ios 6" which can be installed after installing Ultrasn0w, which should fix your problem. Pls report if it worked, cause I haven't read any comments from people who tried it. Here is the tutorial: http://www.redmondpie.com/unlock-ios-6-on-iphone-4-and-iphone-3gs-using-ultrasn0w-fixer/
Jim Powell
posted 1 year ago
Did not work for me.
CHARLENE
posted 1 year ago
Hi there! I have jailbroken my two iPhone 4 with iOS 5.1.1 and iOS 5.1 (both locked in to Japan-Softbank carrier), and I have tried to do the repo666.ultrasn0w unlocking method via Cydia. But it is not recognizing my Philippines sim/carrier. Is there a problem unlocking the Softbank (Japan) carrier? Or is there a problem with their iOS? Hope to get a response. Thank you!
Joe Days
posted 1 year ago
be carefull this guy is a scammer! dont beleive him.
FREOOY
posted 1 year ago
Hey! Joe Days, Im not a scammer...I also hate them...I really do Official Factory Unlocks with the IMEI #... works 100%... You should try to Unlock with me to proof yourself before do this negative comments, I just try to help someone who may need it and you just judge without any reason....
Joe Days
posted 1 year ago
So why don't you make the offer in real ebay?? They have buyer protection policies that in case the buyer is not satisfied will can complain and receive money back.
Joe Days
posted 1 year ago
So why don't you make the offer in real ebay?? They have buyer protection policies that in case the buyer is not satisfied can complain and receive money back.
FREOOY
posted 1 year ago
My offer actually is in EBay Clasiffies if you go to the URL link that I put on you will see... anyway the payment is via PayPal wich is the same as EBay and also has the buyer protection in case that something goes wrong.....So do you want to try?
Joe Days
posted 1 year ago
Ok, I didn't know that ebayclassifieds.com domain belong to ebay.com, sorry for my ignorance. About your offer I really hope your buyers get satisfied, In my case I don't need by know....my Iphone is JB and has an old unlocked BB .
Patel Dishant
posted 1 year ago
please give me s aolution for basband 05.15.04.how can i unlock iphone 3g having ios 4.2.1 with basband 05.15.04.. plz help me
George
posted 1 year ago
You have to change your baseband. That's the only way. Follow the instructions here to change to 6.15 baseband that you can later unlock. http://www.iclarified.com/entry/index.php?enid=13000
kc
posted 1 year ago
I followed all the instruction, for some reasons, it didnt work. I have 3g, iOS 4.2.1, and 06.15.00
Himo
posted 1 year ago
Hey man u should be on 6.15 than follow DEV TEAM BLOG. I upgrated my 3g to 4.2.1 than with redsnow i JB it and also unlocked it with ultrasnow. Here is the link http://blog.iphone-dev.org/ Look at BASEBAND FREEDOM. Good luck man.
innovative
posted 7 months ago
Patel Dishant - October 10, 2012 at 8:27am please give me s aolution for basband 05.15.04.how can i unlock iphone 3g having ios 4.2.1 with basband 05.15.04.. plz help me Use Remote unlocking method to unlock iphone 3g . You can get it from any of the online vendors like Superunlockcodes.com to unlock it .
ahmadswati
posted 1 year ago
i am so so grateful to u all.... thanks a lot..... it really worked and i am out of trouble now
Galoper
posted 1 year ago
Hi, i've a 3GS with iOS 4.1.. in the past i change my baseband to 06.15.00 to unlock.. but now i change again to with redsnow and my phone work perfectly.. but i wanna update to iOS 5.1.1 and want that my phone still unlocked.. what i have to do ? if i upgrade to 5.1.1, jailbreak it and then unlock with ultrasnow, still works ? tnks!
MasTerDaYs
posted 1 year ago
you alreafy can downgrade your ipad baseband: http://www.iclarified.com/entry/index.php?enid=22652 then jailbreak it with redsnow: http://www.iclarified.com/entry/index.php?enid=20522 it worked for me, I have an old bootrom 3GS(4th an 5th digits of serial number are below 40(iphone production week)) After Jailbreak just insert the sim card and connect to a wireless network to activate it ;)
MasTerDaYs
posted 1 year ago
you alreafy can downgrade your ipad baseband: http://www.iclarified.com/entry/index.php?enid=22652 then jailbreak it with redsnow: http://www.iclarified.com/entry/index.php?enid=20522 it worked for me, I have an old bootrom 3GS(4th an 5th digits of serial number are below 40(iphone production week)) After Jailbreak just insert the sim card and connect to a wireless network to activate it ;) Greetings from Portugal!
Mikepole
posted 1 year ago
I would also like to give a big thank you to the development team. You guys are awesome and deserve much praise.
nesreen
posted 1 year ago
please i need your help , i have iphone 3GS with firmware 06.15.00 and i tried all the above steps then inserted my Sim Card but didnt work .... what shall i do please ?
innovative
posted 7 months ago
nesreen - October 2, 2012 at 5:25pm please i need your help , i have iphone 3GS with firmware 06.15.00 and i tried all the above steps then inserted my Sim Card but didnt work .... what shall i do please ? Hi, Do you want to unlock your iPhone 3gs ? If yes, use Remote unlocking method . you can get it from any of the online vendors like Wickedunlock.com to unlock it .
SheDetails
posted 1 year ago
Hi I’m new here, but a true Do-It-Yourselfer…. I need help pretty please! My phone info/status is as follows: Network: Not Available Version: 5.1.1 (9B206) Carrier: Carrier 12.0 Model: MC555LL Serial: QR2077QSEXX Modem Firmware: 05.16.05 Questions/Help Needed: 1. Does my phone even qualify for the jailbreak and unlock? I used redsnow to jailbreak and everything processed with no errors. Cydia was loaded onto my iphone, opens up fine, etc. But I still feel uncertain because when I stick my tmobile sim card into the iphone it continues to say “Searching…”, yet it lets me know I have a voicemail… now how is that?? 2. Do I have to downgrade the BB in order to get things working correctly? I never touched the Baseband, because there was nothing that ever really said “Mandatory or Required”. :) Any quick help or guidance would be great! Thank you in advance.
MasTerDaYs
posted 1 year ago
you're baseband is locked...is it a 3GS? becuz by the SNR it has a new bootroom and that means that if you upgrade the BB to Ipad version 06.15.00 you may not be able to downgrade it to unlock using the procedure described here: http://www.iclarified.com/entry/index.php?enid=22652 then jailbreak it with redsnow: http://www.iclarified.com/entry/index.php?enid=20522
MasTerDaYs
posted 1 year ago
you're baseband is locked...is it a 3GS? becuz by the SNR it has a new bootroom and that means that if you upgrade the BB to Ipad version 06.15.00 you may not be able to downgrade it to unlock using the procedure described here: http://www.iclarified.com/entry/index.php?enid=22652 then jailbreak it with redsnow: http://www.iclarified.com/entry/index.php?enid=20522
mulje
posted 1 year ago
i update my iphone 3GS to ios 6.0,when i finished updating it shows me that THE SIM CARD INSERTED IN THE IPHONE DOES NOT APPER TO BE ACTIVATED,PLEASE INSERT THE SIM CARD THAT CAME WITH YOUR IPHONE OR VISIT A SUPPORTED CARRIER STOTE TO REPLACEMENT SIM CARD’please help me, what i can do now?
Juan
posted 1 year ago
i have the same issue of upgrading to iOS 6 and didn't recognise my SIM, what can I do? is it possible to downgrde it even without it being "active". like from software? Thanks for your help
Rikab Kothari
posted 1 year ago
My iphone3gs is already jailbroken. I am having Version 4.1. Now I want to upgrade it to iOS6. But the issue is as you know we cannot upgrade jailbroken iphone using iTunes. Now as I have followed the above steps will I be able to upgrade my iOS to iOS6? Please help!
mulje91
posted 1 year ago
hi,i update my iphone 3GS last night,when i finished updating it shows me that THE SIM CARD INSERTED IN THE IPHONE DOES NOT APPER TO BE ACTIVATED,PLEASE INSERT THE SIM CARD THAT CAME WITH YOUR IPHONE OR VISIT A SUPPORTED CARRIER STOTE TO REPLACEMENT SIM CARD’please inform me what i should to do to above in email.
chik
posted 1 year ago
thanks so much.. i've successfully keep my 3gs alive again..fuhhh..
jazz
posted 1 year ago
What about firmware 05:16:05 on IOS 5.1.1. Does it qualify for this jail brake tutorial? Also, will it affect my service with my current phone carrier?
Edd
posted 1 year ago
I also want to know if this process qualifies to the firmware 05.16.05 on IOS 5.1.1
Edd
posted 1 year ago
I solved my problem lol, what i did on my Iphone 3GS was upgrade my modem firmware 05.16.05 to 06.15.00 Ipad baseband and then downgrade to 05.13.04 and installed ultrasn0w so i could unlock the Iphone and recognize any SIM inserted but i tested it on 06.15.00 and i was having low signal/no signal so i followed the steps here > http://iclarified.com/entry/index.php?enid=22652 but i think at first when upgrading to the Ipad baseband i put a check on the "Install Ipad Baseband" and i did the same process a second time to downgrade to 05.13.04 just that i put a check on "Downgrade from Ipad Baseband" the second time and it worked it showed i was on 05.13.04 so then i uninstalled ultrasn0w and installed it again now i can make calls and send msgs with my Iphone which is like more than the other on (Android).
shedetails
posted 1 year ago
Hi there: Can you take a look at my comment please? Because your situation is identical to mine. My struggle is knowing if I really need to tamper with the Baseband. Can you give some guidance. I think understand your success, but I’m trying to see if the Baseband upgrade/downgrade is causing my epic fail :) Thank you kindly!
eddpr89
posted 1 year ago
What u need to do in order to use any SIM is the process here > http://iclarified.com/entry/index.php?enid=22652 , i did it 2 times with the same firmware from here > http://www.iclarified.com/750 using this the first time upgraded my firmware to 06.15.00 and the second time downgraded to 05.13.04 but only cause i selected it in the redsn0w > jailbreak process so when i did it the first time i also installed cydia along with the Ipad baseband 06.15.00 and installed ultrasn0w from cydia (you need to add the source http://repo666.ultrasn0w.com in order to download ultrasn0w) then the second time i did the same but when i went to "Extras" in the redsn0w main menu i selected "Select IPSW" (i also did this the first time) and after that went to Extras again and this time selected "Downgrade from Ipad Baseband" after it did the whole thing i got the 05.13.04 but i uninstalled "ultrasn0w" and installed it again, after that i tested the SIM and it worked though mine is from T-Mobile and where i live it seems i still don't have 3G so it just shows an "E" its slower internet but at least works, btw you can contact me by email > edd9891@gmail.com i'll gladly help you out with any doubts :)
eddpr89
posted 1 year ago
What u need to do in order to use any SIM is the process here > http://iclarified.com/entry/index.php?enid=22652 , i did it 2 times with the same firmware from here > http://www.iclarified.com/750 using this the first time upgraded my firmware to 06.15.00 and the second time downgraded to 05.13.04 but only cause i selected it in the redsn0w > jailbreak process so when i did it the first time i also installed cydia along with the Ipad baseband 06.15.00 and installed ultrasn0w from cydia (you need to add the source http://repo666.ultrasn0w.com in order to download ultrasn0w) then the second time i did the same but when i went to "Extras" in the redsn0w main menu i selected "Select IPSW" (i also did this the first time) and after that went to Extras again and this time selected "Downgrade from Ipad Baseband" after it did the whole thing i got the 05.13.04 but i uninstalled "ultrasn0w" and installed it again, after that i tested the SIM and it worked though mine is from T-Mobile and where i live it seems i still don't have 3G so it just shows an "E" its slower internet but at least works, btw you can contact me by email > edd9891@gmail.com i'll gladly help you out with any doubts :)
eddpr89
posted 1 year ago
What u need to do in order to use any SIM is the process here > http://iclarified.com/entry/index.php?enid=22652 , i did it 2 times with the same firmware from here > http://www.iclarified.com/750 using this the first time upgraded my firmware to 06.15.00 and the second time downgraded to 05.13.04 but only cause i selected it in the redsn0w > jailbreak process so when i did it the first time i also installed cydia along with the Ipad baseband 06.15.00 and installed ultrasn0w from cydia (you need to add the source http://repo666.ultrasn0w.com in order to download ultrasn0w) then the second time i did the same but when i went to "Extras" in the redsn0w main menu i selected "Select IPSW" (i also did this the first time) and after that went to Extras again and this time selected "Downgrade from Ipad Baseband" after it did the whole thing i got the 05.13.04 but i uninstalled "ultrasn0w" and installed it again, after that i tested the SIM and it worked though mine is from T-Mobile and where i live it seems i still don't have 3G so it just shows an "E" its slower internet but at least works, btw you can contact me by email > edd9891@gmail.com i'll gladly help you out with any doubts :)
Pete Buckley
posted 1 year ago
Didn't work at first but restarted Springboard without SIM in and only loaded it after the phone was completely up and was at the home screen. loaded SIM and it detected T-Mobile Thx Dev Team!!!
Danny Green
posted 1 year ago
tried unlocking as it said above but not finding network. anyone know a fool proof way of finding out why not?
Marco Antonio
posted 1 year ago
Thank you so much, the information was really helpful ´cause there are no technicians were I´m now.
born2last
posted 1 year ago
THANKS ALOT VERY INFORMATIVE I HAVE IPHONE 3GS 4.1 BASEBAND 05.13.04 ITS JAILBROKEN WITH REDSNOW AND UNLOCK WORKING FINE CAN I UPDATE/JAILBREAK TO 5.1.1 AND UNLOCK SERIAL NO IS XX022 PLS HELP BY SENDING ME EMAIL THANKS ALOT
british
posted 4 months ago
There are a lot of techniques available to unlock iphone 4 : 1. By using unlocking software like cydia 2. Imei unlocking method 3. To unlock iphone from service provider 4. By using Remote unlocking service which is available at TheUnlockSpot.com
mancavn
posted 1 year ago
i follow instruction thru step 14, thay all look right but the iphone still not read simcard, it still shown no service on the top
3GS Help
posted 2 years ago
Hello, I have a 3GS on 05.13.04 that was on 4.0.1 jailbroken and unlocked. I recently used redsnow to create a custom ISPW for 5.1.1, then used iTunes to restore to the new _BB_ IPSW. Everything seemed to go smoothly, however I can't get the phone to get any signal, even with an AT&T SIM and this is before I jailbreak it. I tried jailbreaking and using the "ultrasnow fixer for 5.1.1" before using "UltraSn0w" to unlock an still nothing.
bisht
posted 2 years ago
how r u..? i am great..
happy birthday
posted 2 years ago
I want to share something which is pretty nice too.
Fatcular
posted 2 years ago
Does it work on tethered jailbreak? Is there any sim in the phone when installing Ultrasn0w? Please reply, I need help.
Daniel
posted 2 years ago
Thanks a lot!!! Works on iPhone 3GS 4.2.1 BB 05.15.04 - AT&T
REBECA
posted 2 years ago
how long does it take to get out of DFU mode?
lionhart23
posted 2 years ago
Got it to work with my iPhone 3GS with iOS 5.0.1. Now I just gotta find a way to untether my new bootrom 3GS...
Dan
posted 2 years ago
Will Corona work to untether your iOS5 Jailbreak?
innovative
posted 7 months ago
There are a lot of techniques available to unlock iphone 3g/3gs/ 4 : 1. By using unlocking software like cydia 2. Imei unlocking method 3. To unlock iphone from service provider 4. By using Remote unlocking service which is available at Wickedunlock.com
ram
posted 2 years ago
how to unlock 4s. ive jailbreak software but i dont no how to unlock my locked iphone4s which i got it from uk. is there any way i can unlock it for free?
Rodrigo Frota
posted 2 years ago
Can I Downgrade an iPhone 4 from 5.0.1 firmware to 4.2.1 without having saved any SHSH? what if i upgrade the baseband to 06.15.00? I Just need to unlock an iPhone 4 5.0.1/04.11.08... don`t matter what i have to do...
cosmichaze
posted 2 years ago
guys i found ultrasnow after long exploration .Its in Cydia/sections/utilities.install it and enjoy.no need to add repo 666 now
Sameer
posted 2 years ago
Upgraded to ios5, jailbreaked it and unlocked with the above instructions. Modem firmware is the same 6.5.not able to loging to my native carrier. Shows carrier option. In automatic option does not load and manually gives error message "unable to load network list" Any idea whats the problem and the solution. Thanks!
nicod
posted 2 years ago
Hi and thank you to the team for their incredible efforts! You guys truly make the world a better pace! I just jailbroke my phone (3GS, 5.01, baseband 05.16.05) , see the Cydia icon, but in the "Sources", I see"Dev Team", repo666.ultrasn0w.com, but there is nothing when I click on it. I tried adding it, and I got an error message saying there was no package at this url or something. Questions: - Can I unlock with the current bb (05.16.05)? - If not, I can only upgrade, right? I read somewhere that upgrading the bb to 6.15 will break my GPS. Is that right? - How do I upgrade the bb? - Why do I not see the packages under the repo666 source? Thanks again!
caberg v2r
posted 2 years ago
I get error message and a statement telling me its giving up. I've followed each step verbatim. If anyone has any ideas please let me know, thx.
dt
posted 2 years ago
Finally thank you devision team the untethered JB is a great xmas gift. It took 5 minutes to JB and unlock. Now my Iphone is untethered ty div team
angel
posted 2 years ago
I feel your pain...I am looking for a SIM to try in mine to see if it worked..my phone is still functioning after jailbreak and ultrasn0w...wonder if its good... lol
Jack
posted 2 years ago
Hey just got a 32gb iPhone 3GS . Was turned on when received in the post and had cydia already loaded, when I downloaded the latest version on iTunes the phone turned off and back on to the initial setup. Connected to our wireless Internet and then tried to finish settup but will not work ? How can I get onto it and change it from AT
Bharat
posted 2 years ago
Hey I have an iphone 3g version 4.2.1 on 6.15 bb ... I've been trying to unlock my phone and everytime i enter the repo666 for ultrasn0w.. it installs everything but in cydia, in step 8, there is no entered by user tab.. instead i have a dev team repo installed with repo666.ultrasn0w.com written under it... any help?? my phone picks up network for a bit and then drops it again..
Simon
posted 2 years ago
I have a similar problem. Once i enter "repo666.ultra...." there is a repository called Dev Team with repo666.ultrasn0w written underneath it, but it is completely empty. Thus I can't install any packages and can't use my simcard... I can't find anything related to ultrasn0w somewhere else in cydia neither. It's an iPhone 3G with Baseband 6.15.00 and iOS 4.2.1, jailbroken with pwnage tool... please help!
Bharat
posted 2 years ago
Someone help us damnit!! :P no seriously!
minh chi tran
posted 2 years ago
Hello! I just found new source to fix Ultrasn0w Cracked . If any one want known this source and how to finish unlocked iphone ..please let me known ? 100% working ultrasn0w .I still on update video youtube.Thank you!
Bharat
posted 2 years ago
Yeah man.. post the fix link here if you've got it...
minh chi tran
posted 2 years ago
Here video ultralsn0w working...help your unlock anyphone.http://youtu.be/jJxRGRkJdeQ
Simon
posted 2 years ago
Hey can anyone please help me? after i install ultrasnow it would ask me to restart springboard and I do.. after that happens my iphone restarts and its stuck on the restarting screen its been over 20min ;l.. i tried holding homebutton and power to restart my iphone it would restart it but when i wouldn't get any service!
joe bobbid
posted 2 years ago
Guys use puppyra1n instead, http://www.puppyra1n.com/
saimer
posted 2 years ago
Thanks for the instruction. I followed to unlock a jailbroken iphone 3G 4.2.1 BB 06.15. ultrasn0w seems running fine but after changing SIM card, it shows no service. I have a Fido phone, and changed to Telus SIM card. Under settings->carrier, it shows Rogers (not Fido any more), but in settings->phone, new Telus SIM number is displayed. My 3G is always off. Did I miss any settings? Or can I re-run UltraSn0w to try unlock again? Thanks for your help!
E
posted 2 years ago
I have the same issue. The phone does not really seem to be unlocked. I also have a 3G with 4.2.1 and 6.15 baseband.
Vivek Mehta
posted 2 years ago
i have iPhone 3GS i05 firmware update already then 6.15.00 modem firmware good still! but start jailbreak and unlocked already. Happen power off apple logo longtime 3-4 hour problem! what's wrong? Thank u!
LARRY_RUDD@YAHOO.COM
posted 2 years ago
Vivek Mehta Vivek Mehta Vivek Mehta Vivek Mehta u are a FUCKEN IDIOT if u had it lock up for 3 hours and ur still waitng U do not deserve to have an iphone cus ur too dumb better to stick to a land line u moron
Vivek Mehta
posted 2 years ago
i05 firmware 6.15.00 unlocked possible working?
innovative
posted 6 months ago
I would like to share my experience here . I used KPN Netherlands Apple iPhone Unlocking Service to unlock my iPhone 4. I got it from the provider Classicunlocking.com
Jason
posted 2 years ago
Iphone 3gs on 6.15 baseband. I've tried everything even went on youtube and tested the affinity theory. None works. Cannot jailbreak it either freezes near the end or I get error message and a statement telling me its giving up. I've followed each step verbatim. If anyone has any ideas please let me know, thx.
jenkins27
posted 2 years ago
I have an odd situation and I have been searching for an answer for months but cannot find any info. I have a 3gs on 4.2.1 with 04.15.04 baseband and it is unlocked. I am not sure how this is and I would like to find out more about it to see if it is safe to move up to ios5 at some point. I had a 3gs that was on 4.2.1 but on an older unlockable baseband and did regular itunes syncs. My phone broke but was under warranty and apple gave me another 3gs but it was on the 04.15.04 baseband. I plugged it into itunes and told itunes it was my iphone and to sync my old info to it. I jailbroke it as well with redsnow. And it is unlocked. I think that the itunes sync somehow passed on the unlocked state to my replacement phone. Either that, or it is factory unlocked which seems unlikely. I dont want to test anything for fear of losing my unlock. Does anyone know whats going on here? Thanks.
Jorge
posted 2 years ago
I have an iPhone 3GS version 4.3.4 I have Jailbroken it, and went to Cydia and did the Ultrasnow to unlock, but when i put my t-mobile sim card I cant do calls or anything, PLEASE HELP, and THANKS
Rangler
posted 2 years ago
Ab fab my gdooly man.
dale carter
posted 2 years ago
excellant so easy to follow did 2 phones in like 2 minutes :D
Jignesh Patel
posted 2 years ago
please help me i installed iphone 3g but i got an error "unable to load Network List" Please help me
Faiz YYZ
posted 2 years ago
Come on GUYS, ask question about above mentioned tutorials...
Liz
posted 2 years ago
How long does it take to restart after you press the reload springboard button? Mine hasn't yet and its been almost 10 min. And it won't turn off.
Chris
posted 2 years ago
I have an iPhone 4 on Version 4.3.3 and Modem Firmware 4.1.1. I just jailbroke the phone by downloading Cydia at www.jailbreakme.com. HOW DO I UNLOCK THIS PHONE?? I NEED HELP! Please help me out!!
muhammad tariq
posted 2 years ago
please help me to unlock and jailbreak 3gs with firmware 06.15.00 and have present version 4.2.1
Fernanda
posted 3 years ago
I have an iphone 3gs new bootrom, baseband 5.13.04 I want to upgrade to 4.3.3 and unlock it using this tutorial. When I searched the unlock wizard, it directed me to this tutorial. But this tutorial says it's for 4.2.1 only... So, will it work for 4.3.3 too? And for the new bootrom?
srizvi1
posted 2 years ago
I'm not sure how the Bootrom factors into it but I on my iPhone 3gs, I was at firmware version 4.0 for a year and finally used a customized ipsw to take it from 4.0 to 4.3.3 while keeping the baseband at the unlock-able 05.13.04. Hopefully this page will help: http://jailbreakqa.com/questions/56875/how-can-i-upgrade-40051304-iphone-3gs-to-latest-possible-firmware-that-keeps-it-unlock-able After you update your firmware using the steps (it'll be jailbroken too), come back here and follow the steps to unlock.
Thena
posted 2 years ago
BION I'm ipmsresed! Cool post!
selvi
posted 3 years ago
Hi guys, please somebody help. I have updated my Iphone 3G from os 3.0 to 4.2.1 using firmware 4.2.1. and firmware 4.2.1. custom and redsn0w. Now I have jailbreack my phone but I lost my 3G connection and I cannot install ultrasn0w. Please somebody help.
kingmansoor
posted 3 years ago
ITS UNLOCK IPHONE4
innovative
posted 4 months ago
Remote unlocking method is used to unlock iPhone 4 . it is available at MobileUnlockSolutions.com .
Tom Andersone
posted 3 years ago
@mark, try using kittyra1n, its easier and its untethered http://www.kittyra1n.com/unlock-iphone.html
Rick
posted 3 years ago
Okay so i have the iPhone 3Gs and i followed the instructions, and it worked kinda... It says "searching" and that is all it says... :( Help? R
Scarlet
posted 2 years ago
Did you find out how to fix this problem in the end mine is doing the same thing :(
raim
posted 3 years ago
Hi, Does any body has a clue if it will be ever possible to unlock 3gs with 05.15.04 baseband without upgrading it to iPad baseband? Or at least is there any update how are things going with the iPad baseband downgrade?
Andrew
posted 3 years ago
Hi, I have an iOS 4.3.3 with a baseband 04.10.01. Please, someone if know how can I install a version wich can be unlocked... Thanks very much !
george thompson
posted 3 years ago
You guys do know you can jailbreak and unlock any iPhone with kittyra1n right?? Just go to http://www.kittyra1n.com/ I think it was made by geohotf
raim
posted 3 years ago
how this is different from this post? it also uses upgrade to iPad baseband which criples GPS...
innovative
posted 5 months ago
There are a lot of techniques available to unlock iphone 4 : 1. By using unlocking software like cydia 2. Imei unlocking method 3. To unlock iphone from service provider 4. By using Remote unlocking service which is available at SuperUnlockCodes.com
Cesar G
posted 3 years ago
Soooooo. I did everything right. And It still says "could not activate cellular data. " and I'm running on a 05.16.02 baseband. So does this mean this didn't work? Someone please help me.
PK
posted 3 years ago
Hi I have Iphone 3G with 4.1 ATT. How can I update to 4.2.1? It says in itunes to insert the original sim which I do not have? It won't let me access the iphone in itunes so I can update it. Do I use redsnow to update to 4.2.1?
Ivan
posted 3 years ago
Hi, I have an iPhone 4 4.2.1 with baseband 03.10.01 ... Does anybody know if there is an unlock for this ? I have been looking everywhere but can't find it. Does that Gevey SIM work ? Please HELP ! Ivan
pk
posted 3 years ago
I have 4.1 on a AT&T 3G. How do I update to 4.2.1 first? when I try to in itunes it says to insert the original active sim card which I do not have?? Help
Kashif
posted 3 years ago
Hi ! It worked ! at first I couldn't get it done , I was on 4.1 basband, what i did was upgrade to 4.2 first, then I did a jailbreak using ipad software, then used ultrasnow to unlock it, hope it helps !
Mohith
posted 3 years ago
Fantastic..IThanks a lot..It solved my problem and saved my phone.
Lilith
posted 3 years ago
I have followed all steps in this post but I still get a sim locked message. The only thing that I might have done wrong is that I upgraded the iphone 4 from 4.3 to 4.3.3 (8J2) using itunes earlier, my firmware is 04.10.01. Could upgrading make the phone entirely un-unlockable? Else, are there other ways to unlock the sim when the routine does not work?
Lilith
posted 3 years ago
Q1: can I downgrade the baseband after having accidentally updated it using itunes? Q2: If the answer to Q1 is no, can I expect compatible unlock tools for the updated baseband in the future?
Culpex
posted 3 years ago
Hi folks! I was stucked with my 3GS 4.3.3 baseband 05.12.01 trying to unlock it, since I had no success. After reading the more info section on UltraSn0w in Cydia, I realized what was wrong. You can't reboot the device thru the button that appears after the installation. You have to manually reboot with the slide Power off. Read the more info and you'll get it. Hope it helps!
Carlos
posted 3 years ago
How to unlock the iPhone 4 on baseband 03.10.01?
panimalar
posted 10 months ago
Hi Carlos whether you want to unlock your iphone 4 from network lock ..Then i recommend you to visit Unlock-Zone.com here they will unlock iphone using remote unlocking service ..You first check that whether they are rendering service for your country and network provider ..If yes then pay for it and unlock your iphone 4....
Hyder
posted 3 years ago
hey guys, I did everything, click restart springboard but still can't use my costa rica sim the firmware is 4.1, and the bsaeloader is 05.14.02
dave
posted 3 years ago
05.14.02 isn't unlockable. YOu can wait for a potential unlock in the future (ETA unknown - perhaps never), or you can update your BB to 06.15.04 - I'll be doing that later today for the wife's 3G - http://iclarified.com/entry/index.php?enid=13000
kashif
posted 3 years ago
can someone please help me, when i click on the ultrasnow ap it says the following: NETWORK ERROR THE CERTIFICATE FOR THIS SERVER IS INVALID, YOU MIGHT BE CONNECTING TO A SERVER THAT IS PRETENDING TO BE CYDIA.SAURIK.COM WHICH COULD PUT YOUR CONFIDENTIAL INFORMATION AT RISK, what does this mean ?
iixxacexxii
posted 3 years ago
your date is off. go to settings and put today's date
JR
posted 3 years ago
My Iphone 4 has 4.2.1 firmware, has been Jail-Broken and I successfully installed Ultrasn0w but it still does not accept any of my foreign micro simcards. What gives. Can anyone help? I've removed and re-installed repo666.untrasn0w.com several times so I'm out of moves. Please help?
jazzroom
posted 3 years ago
iPhone 3GS 3.1.2 04.26.08 baseband jailbroken with Pwnage tool than unlocked from Orange France with ultrans0w 1.2.x ---- SUCCESS :) ! thank you All!
bluedemon666
posted 3 years ago
does the sim card from a differant carrier need to be activated in order for the unlock to work?
M. Anwer Shaikh
posted 3 years ago
This is another site Please comment on this site, Has anyone unlocked Iphone 4 thru them. http://www.iphone-unlockme.com/?gclid=CMve5M-a1agCFQd76wodfgygHg
M. Anwer Shaikh
posted 3 years ago
Please comment on this site, Has anyone unlocked Iphone 4 thru them. http://www.easyiphoneunlock.net/
Suzyn
posted 2 years ago
I thank you hmbuly for sharing your wisdom JJWY
Tuan Pham
posted 3 years ago
Hi, I unlocked my iphone 3gs 4.3.1 (8G4) by the instruction is good...but it is no service when plugging my SIM...help
robroadmac
posted 3 years ago
same problem. 3gs, firmware 4.3.1, modem firmware 05.12.01, ultrasn0w 1.2.1. I insert SIM card and "no service", although the number and carrier is recognized...help!
BB
posted 3 years ago
I have jailbroken my iphone 4 but cant unlock it, have tried ultrasnow but my modern firmware is 4.10.01 how can i change this ???? or what can i do to unlock it ?
ojop
posted 3 years ago
same here!! help plx :3
Shameem Islam
posted 3 years ago
Hi, My iPhone4 is also jailbroken but can't unlock, 4.3.3 and 04.10.01 baseband. Anyone knows when is the expected date of release for the working UltraSn0w? By the way, the team has been awesome in releasing all the instructions. Only appreciation is not enough for you guys.
innovative
posted 7 months ago
BB - April 6, 2011 at 2:35pm I have jailbroken my iphone 4 but cant unlock it, have tried ultrasnow but my modern firmware is 4.10.01 how can i change this ???? or what can i do to unlock it ? Hi, You can try Remote unlocking service to unlock your iPhone 4 . you can get it from any of the online vendors like Unlocking4U.com to unlock it .
EBJ
posted 3 years ago
I have a Iphone 3gs and its on 4.2.1 and for some reason I'm having issues with getting my edge to work and it doesn't push anything. I have tried everything but no luck. Any help will be highly appreciated, thanks.
adnan
posted 3 years ago
hi you need to unlock your phone and the tutorial link is at the end of the jailbreak .... cheers adnan
artemaros21
posted 3 years ago
That's nice !!! it actually works on my IPhone 3G 8GB , BB 6.15 , latest installed firmware:4.2.1 !!! great work !!! it really helped !!! :)
dylanlem
posted 3 years ago
HI, may i know how u jailbreak it? im using iphone 3g jailbreak on os 3.0.1 and thinking to jailbreak it to the version you're having now. pls advice.
dave
posted 3 years ago
http://iclarified.com/entry/index.php?enid=13000
Anilkumar Manthena
posted 3 years ago
Thanks... Thanks a lot... It really helped me a lot... :-)
Nitin
posted 3 years ago
The tutorial mentioned that this unlock will work for only 4.2.1.Is that a correct statement?
Minky
posted 3 years ago
Hi, My iPhone 4, is running on iOS 4.2.1 with baseband 3.10.01. When unlock would be available for this baseband. Thanks
Happy
posted 2 years ago
Heck yeah this is exactly what I neeedd.
Nano
posted 3 years ago
Got Iphone4 with 4.2.1 and baseband 1.59 Hacktivated. One time a day since Ultrasn0w is activated I have to use the patch carrier reset fix to enable from new 3G, SMS and calls cause Iphone loss the signal and I can't use my phone anymore even with a hard reboot....there's seem to be a bug ... With 4.1 and Ultrasn0w 1.1 never spoted this kind of troubles.
kbk_75
posted 3 years ago
Hi and thanks for the tutorial. I jailbroke and unlocked my week 27 3GS with baseband 5.15.04 with Pwnage Tool 1.2 but noticed that Cydia would not open. So I added Cydia with RedSn0w. Then went to Cydia and installed Ultrasn0w. Realised my baseband was not suppoted, so upgraded to 6.15 baseband and installed Ultrasn0w. However, ever since I installed UltraSn0w my phone repeatedly reboots and when it stops rebooting it says that Springboard has crashed and that it is in Safe Mode. Repeated restarts of Springboard, shut down / start-ups and even a full hard reset with fresh jailbreak and unlock have made no difference, Springboard still keeps crashing and the phone starts in Safe Mode. If I uninstall Mobile Substrate, it starts fine, but then my Sim Card is not detected. Ultrasn0w also gets uninstalled if I uninstall Mobile Substrate. What do I do to resolve this issue? Appreciate any help. Thanks.
Скалоцький Роман
posted 3 years ago
у меня есть больше информации о iPad http://www.ipadshouse.com/
Arnar Sveinn
posted 3 years ago
Hello.. I've got a iPhone 4, version 4.2.1 (8C148), baseband 03.10.01.. is there no way to unlock this version with this baseband at this time? Thanks in advance!
sidney
posted 3 years ago
Hello, is there any body can help me here. I unlocked my iphone 3gs 4.2.1 with ultrasnow and i didnt realized that that my baseband is 05.15.04. is there any possible way to return to my old carrier? i dont have any network signal in any of my 3 Sim cards...
innovative
posted 4 months ago
Well ! I used T-Mobile Netherlands Apple iPhone Unlocking Service to unlock my iPhone 4 from carrier lock . i got it from the provider TheUnlockSpot.com to unlock it .
cha_cha_mia
posted 3 years ago
Just wanted to confirm something: My iPhone 3gs was bought used off craigslist in August 2010 and had never been jailbroken/unlocked. It was upgraded to the latest firmware at the time which was version 4.0 (8a293) . It was then jailbroken (I believe with jailbreakme.com) and unlocked too be used on t-mobile. Nothing has been updated on the phone since then but I would like to. I just checked and it has a baseband (modem firmware) right now of 05.13.04 I think if I was to update to the latest version (4.2.1?), I could jailbreak via Greenpois0n but I could not unlock so I could use with other carriers, is that correct? I am getting that info from this page: iPhone | How to Jailbreak Your iPhone 3GS, iPhone 4 Using Greenpois0n (Mac) [4.2.1] http://www.iclarified.com/entry/index.php?enid=12227&laid= specifically this line: "Do not update to iOS 4.1 or iOS 4.2.1 if you need the unlock. Ultrasn0w does not support that baseband yet. "
Devon
posted 3 years ago
Yeah I'm pretty sure you can jailbreak any iphone/ipod touch ,but it is the unlocking that is limited.
cha_cha_mia
posted 3 years ago
Thanks for taking the time to reply Devon - I guess I have to wait until unlocking for the latest firmware is released (for the 3gs)
pepe
posted 3 years ago
Ok for all people out there - Keep in mind that by doing this unlock you are installing an IPAD firmware on your iPhone. What does that mean - in the future if you update your phone and it locks again, to unlock it - you will need an unlock that it is written for the iPad firmware - highly unlikely to get one. I know its a bummer as I myself am in this situation and it just driving me crazy... Good luck to all.
Ankur Misra
posted 3 years ago
I am confused. Luckily (i think) i did not upgrade to baseband 6.15 but my 3gs is on version 4.2.1 and band 05.15.04 - it appears i have to change this to another baseband to unlock it but not sure how to do this. PLease help. Thanks very much.
Ankur
posted 3 years ago
iPhone is activated!!! Buetiful!!! THANK YOU DEV TEAM - btw get the 6.15.00 baseband it works!
Pepe
posted 3 years ago
Here is the thing. Do not and I repeat do not proceed with this unlock. Your phone as it is right now should be Jailbroken on 4.2.1 an runing the normal firmware. Thtat is actually good. If u proceed with the unlock - you will end up installing the Ipad firmware and u will not be able to revert back. From then on Itunes will recognize ur Iphone as an Ipad. Yes it will be unlocked to use with other carriers but if a new update(4.3 for instance)comes along and u install it ur phone will lock and you will not be able to unlock it unless the unlock is prepared for Ipad firmware. You see once u install the Ipad baseband 6.15.00 or whatever the numbers are - Itunes will see ur phone as an Ipad. So what I've done is just wait for proper unlock if one ever comes along. The rumors are tht the ne Iphone will come out in july. Untill then I'll hope for unlock or I'll buy an old Iphone tht is actually locked to my carrier. Once the new Iphone is out I'll buy it from Canada - Factory Unlocked - therefore no more need of stupid not well done unlocks. If u cant wait you can do the same thing with the Iphone 4. Just buy it from an apple store in Canada and solve ur problems at once. I hope this helps
Ankur Misra
posted 3 years ago
if u live outside of NA ignore what he said
Insensitive
posted 3 years ago
Can I jailbreak and unlock 4.2.1 iPhone 4 Windows with modem firmware 03.10.01? btw i have upgrade my 3G baseband with clicking "Install ipad baseband" while Jailbreaking with RedSnow. And it became to 6.15. then i was able to unlock. Does it work again for Iphone 4?
Krystian
posted 3 years ago
Many Thanks !!
svs
posted 3 years ago
i unlock 3gs 4.2.1 baseband 6.15 after unlock with ultrasnow network show no service and a pop menu that say "waiting for activation" . please help
Rabi
posted 3 years ago
i had a iphone 3g which imei no is 01 202200 154435 2 iwould like to unlok this iphon
GerryFlo
posted 3 years ago
Stuck on no service...please help. (On day 4 with this) iPhone 3G, Version 4.2.1, firmware 05.15.04, installed redsn0w (no problem), installed ultrsn0w (no problem). Original carrier was Rogers. In my settings under ABOUT I see carrier fido and the new SIM card number. This is who I want as my carrier. I'm assuming it's unlocked as it now sees Telus and it didn't the other nights. Am I wrong in assuming this? Carrier tab still sees Rogers only, Network tab says not available, phone tab shows my phone # and my Telus carrier. I have toggles airplane mode, rebooted phone...I don't know what else to do. Can any one help? Tried to keep this short but provide needed info.
Gmaj13
posted 3 years ago
You need to update your baseband to 06.15.00 ....unlick is not supported with a baseband of 05.15
Devon
posted 3 years ago
FINALLY! After two straight days of tinkering with this stupid jailbreak/unlock I got it to work! Tmobile is working confirmed! On my first try I got it to work, but I got stuck at the apple logo on bootup after the ultrasnow "reboot/respring." If anyone runs into this problem..put your iphone ˆ˜DFU mode and then re-run redsn0w in "boot in tethered mode" Your iphone should reboot in tethered mode and tada your iphone should be unlocked, just pop your sim in and go. If anyone is having this problem and wants to contact me for any further information, email me at connellyde@aol.com. Thanks! And good Luck!
plesa0305
posted 3 years ago
thanks a lot, you saved me. I had the same problem
Chris
posted 3 years ago
Hello, i have and iphone4 32gb that is jailbroken and has cydia, it is running on 4.1firmware and the modem firmware is 02.10.04, when i open cydia on top it says SHSH iOS 4.2.1, my problem is i dont know how to unlock the phone for any carrier...ive been reading and trying stuff for 3 days now, can someone help me?
warp44
posted 3 years ago
just install ultrasn0w and it should work-
Chris
posted 3 years ago
I did that but it didnt unlock i also did it on another Iphone4 16gb with exactly the same modem firmware thats jailbroken with limera1n and it didnt unlock either. I was trying stuff with the 32gb i mentioned earlier and i updated to 4.2.1 firmware now and the modem firmware is 03.10. smth but i messed up and cant jail brake it, after i jail brake it with redsn0w it wont let me tether boot it up again, i managed once to jailbrake it and after i updated cydia it rebooted but wouldnt reboot with redsnow tethering plus i try to restore it to the original firmware and itunes keeps popping up an error so i messed up quite a bit, didnt touch the 16gb one so that i dont loose the untethered jailbrake but still locked. Big big mess
Cult Doctor
posted 3 years ago
I want to upgrade to OS 4. I have a jailbroken and unlocked firmware 5.12.01 with version 3.1.3. How can I upgrade to OS 4(*) unlocked and jailbroken?
Keltro
posted 3 years ago
I have an Iphone 3G and tried to unlock it. I did the following: ugraded it to 4.2.1, jailbreaked it with redsnow, installed 06.15.00 bb. installed utlrasnow 1.2 with cydia, but it's still locked. I get "no service" when I enter my simcard. Any suggestions? Reinstallation?
dubla
posted 3 years ago
ok so i am going to jailbreak with limerain and unlock with ultrasnow. my question is cam i use my current at&t carrier to text,call,etc... and also if yes how and does my signal lower and and my 3g work? becuase at&t just built 3g towers where i live and i dont wanta give that up... thanks for any help i did my best to explain this as easy as i could, again any helpful responce is much appreciated.
ANON
posted 3 years ago
@ missKeltro yes june 4 to be exact im in the same boat i should have left my phone alone now i have to wait so long also
tai
posted 3 years ago
I have 3G. jailbreak to 4.2.1 with 6.15 for unlock. When the insert the sim card, it doesn't work. I get one bar on the signal. But no carrier shows up and no call can be made. Can you one tell me whatelse I need to unlock so I can use T-mobile with iphone?
innovative
posted 5 months ago
There are a lot of techniques available to unlock iphone 3gs : 1. By using unlocking software like cydia 2. Imei unlocking method 3. To unlock iphone from service provider 4. By using Remote unlocking service which is available at Unlocking4U.com
MiPhone
posted 3 years ago
Stuck on no service...please help. (On day 4 with this) iPhone 3G, Version 4.1, firmware 06.15.00, installed redsn0w (no problem), installed ultrsn0w (no problem). Original carrier was Rogers. In my settings under ABOUT I see carrier Telus and the new SIM card number. This is who I want as my carrier. I'm assuming it's unlocked as it now sees Telus and it didn't the other nights. Am I wrong in assuming this? Carrier tab still sees Rogers only, Network tab says not available, phone tab shows my phone # and my Telus carrier. I have toggles airplane mode, rebooted phone...I don't know what else to do. Can any one help? Tried to keep this short but provide needed info.
FECES (SON OF ASSMAN)
posted 3 years ago
Keltro WHY THE FUCK DID U PUT 6.15 ON YOUR IPHONE?.... NOW 6.15 CAN NEVER BE UNLOCKED TILL THEY RELEASE A FIX SLATED FOR SOMETIMES IN JUNE ....YOUR PHONE IS USELESS NOW ... WHY THE FUCK DIDNT U READ UP ON IT BEFORE U INSTALLED 6.15 UR SHIT OUT OF LUCK BITCH
patel mahamed
posted 3 years ago
i buy u phone ok Keltro i not care if you make 6.5 i buy $100 ok ?? say ok please it good money ur phone no good for you but good for me ok? emale me ok? www.cam4.com
warp44
posted 3 years ago
What the Fuck are u talking about? 6.15 is the only Baseband the Iphone 3G will work on. There is no other Modem Firmware for that. Support has stoped. No new ios. I have 6.15 and all works fine. 6.15 is the ONLY baseband u can unlock on a 3g. And the older once of course but not the 14.
Mercury
posted 3 years ago
Hi, i have a 16GB iphone 3GS with firmware 4.2.1 and baseband 06.15. I use redsn0w to start it in tethened mode. I installed ultrasn0w. reboot but it doesn't start. the apple appears and afert some time it goes blank and restarts. entering in tethened mode it says than ultra sn0w is installed. HElp please
kiran
posted 3 years ago
Again do the untether process for the second time . It will work
GerryFlo
posted 3 years ago
hey same thing happened to me same version ad firm. and still nothing help plz
Dillsnik
posted 3 years ago
I want to unlock an iphone 4 for my friend in Colorado, i am on the East coast...is there any way i can check to see that the unlock worked correctly before i send to him? my problem is i am on ATT and don't have access to a Tmobile sim card to cut down to test it on...
offsett
posted 3 years ago
Unlock means that u can put any Sim in it and it should work. If it doesnt the unlock was not done correctly. If the unlock worked u could put ur Att card in it and it should recognize it. whats the Modem Firmware?
Dillsnik
posted 3 years ago
I am on ATT and so was the phone, so checking ATT will not tell us anything....i have to check to get the firmware, but i don't believe it changed at all with the unlock
sun
posted 3 years ago
I have 3GS which had OS 4.1 and 5.14 baseband. I used RedSn0w (Mac) and managed to jailbreak. I have a week 41 serial no, and selected Yes that it had a fixed BootRom, I also selected to install iPad baseband 6.15 and Cydia. It all worked inc updating baseband but the Cydia logo was white on the phone, and would not work when pressed. I ran RedSn0w again and put it into tethered mode. Cydia logo was find and Cydia launched. It updated some packages, rebooted, I had to run RedSn0w again and retether. I then selected UltraSn0w, that loaded and went find until last screen, instead of saying "Return to Cydia" it said "Reboot" which I pressed and then the phone got stuck with apple logo. I held down power and home key, managed to get out of that but phone is now in recovery mode and its stuck. I cannot get it into DFU mode. I tried restore on iTunes using default recovery - after verifying and restoring for 5 mins said error 1015, I tried custom restore on iTunes using Pwnage tool custom build and 8C148 Restore file - both iTunes did not like and immediately said unsupported. I tried 8C148a file and it tries for 5 mins or so and then gives 1015 error again - IPhone could not be restored. I am thinking I can reload the firmware using Pwnage if only I can get it into DFU mode - help please, phone stuck in recovery mode still. Once in DFU I will use Pwnage tool instead of RedSn0w - at least that is the plan. Maybe my week 41 phone is the old BootRom.
sun
posted 3 years ago
I fix it! Used the procedure here: http://forum.gsmhosting.com/vbb/f456/3gs-1015-error-fixed-successfully-1152179/ Basically used RedSn0w but pointed it to official 4.2.1 ipsw, managed to get phone alive by saying DFU mode only. Then flashed using iTunes with the 4.2.1 custom ipsw referred to in this article. Then ran RedSn0w again to jailbrake, making sure I said it was older BootRom, Cydia was then installed. Unhooked and using Cydia ran UltraSn0w and happy camper now...
offsett
posted 3 years ago
u needed another webpage for this? Did u use the Search Option? I doubt it. Layer 7
toma
posted 3 years ago
dear all,, could you check my reply to your answer below to help me to solve my iphone problem,,, thanks
toma
posted 3 years ago
Mark Benson,,, I am really sympathetic with you.i think you are suffering from a mental problem and need to treat ASAP..
offsett
posted 3 years ago
Try again and again. U obioulsy missed one step. thats the only explaination i have. It worked fine with my 3g so the problems not the Instuctions.
innovative
posted 5 months ago
There are a lot of techniques available to unlock iphone 3gs : 1. By using unlocking software like cydia 2. Imei unlocking method 3. To unlock iphone from service provider 4. By using Remote unlocking service which is available at Unlock-zone.com
janus
posted 3 years ago
hi, i really believed that we as users of this site would get useful information about our problems unlocking the iphone. me and several users have had a lot of problems using the methods described on this page, but i dont see anyone answering useful information about how to fix them. Thisi is really a shame, at least u should put some advice at the beggining of the article about disastrous things happening (like it happened to me, my iphone got stuck and wont start), or not receiving signals, or whatever, instead the article is written in such a way that shows you that everything is easy, which it isnt.
offsett
posted 3 years ago
The instuctions on this site are very informative and also very helpfull. Wierd i did just like the instuctions said and it worked great. I dont know what ur problem is. Maybe u should start reading the articles and stop crying about it. If u dont know what u are doing then u should not jb or unlock ur iphones. Period. Sorry but this is not the fault of this site it what we like to call a Layer 7 Problem. or also a USER PROBLEM.
janus
posted 3 years ago
offset the instructions arent 100% accurate, the problem is nobody posts a solution for the problem posted. the site also doesnt have warnings about getting ur iphone permanently dmged, blocked or unable to get signals (as some users have posted bfr and after me). Who do you think you are about saying im not cappable of doing something? u dont even know me. ill appreciatte if in the future replies are posted for the benefit of solving the problem, and not for flaming. For example, it would be useful to get information about upgrading the database to 6.15 and any information about getting out of the loop also would be helpful.
dhruva
posted 3 years ago
Hi Janus, try this http://www.youtube.com/watch?v=gP6smWHvtq8&feature=related. i had issues with this tutorial as well. so i found this one, and it fixed it. the key is to definitely read and carefully follow instructions. if it doesn't work, try it again. i had to do it 2-3 times before getting things to work well. good luck!
offsett
posted 3 years ago
1. i never said they are 100% accurate. 2. The way u write makes me think that u dont have a clue about modding /hacktivating ur iphone. 3. 6.15 is no database.... -.- Oh my COD. Its called a Modem Firmware 4. There are 100 Videos in the web that discuss loops on iphones. This Problem stays Layer 7 ^^
Janus
posted 3 years ago
offset, it is obvious i dont know how to do some stuff, thats why im asking for help. instead u post nothing of use knowing how to do something and flaming others doesnt make u a better person Thanks
offsett
posted 3 years ago
Just learn to read thats all im asking. Every single Question u posted can be solved when u read the article. and since u read my Post so clearly u should do the same with this article. im not flaming im just pointing out the Obvious. u are the Problem. not the Iphone nor this Site. oh and ur welcome. :)
Toma
posted 3 years ago
Hi All , I had done the Jailbreak and the unlock tutorials successfully. my iPhone is 3G and now the OS is 4.2 and the baesband is 05.15.04 "it was 5.13 before the upgrade to 4.2" . However i have problem,, when i put the SIM card the iphone stay just searching for the network and after long it gives No Service and when i try to search for the network manual it says Unable to load network list!!! Kindly, I will be really thankful if you could help me to find a solution ASAP? thanks.
Theletter
posted 3 years ago
It means the phone not unlocked
offsett
posted 3 years ago
ur baseband is wrong u need 6.15
Toma
posted 3 years ago
dear theletter and offsett i have followed the both tutorials to jalibreak and unlock twic and it had done well,, and that the baseband that i had after the upgraded!!! so what can i do more? thanks
offsett
posted 3 years ago
Dear Toma. Its very hard to understand what u did now. Could u explain it again please? I want to help but i have problems reading ur post. So u did the jailbreak and unlock twice and it still doesnt work? What is ur baseband now? If its 5.14 something,< Ultrasn0w wont work. U need to Upgrade to 6.15 ipad baseband with the newest Redsn0w edition.
abubut
posted 3 years ago
Offset, you seem very knowledgeable about this Tool. I have been reading Iphone hacking sites for 2 days just trying to learn before i do anything with my iphone. I have 1 question though. I noticed contradicting information. Some say NOT to upgrade to 06.15 and some say YES 06.15 is needed to unlock. Am i Missing something? Thanks offset
Tim
posted 3 years ago
Hey Guys, Ok so this is about hour 6 trying to do this. I have and iPhone 3gs with 4.2.1 firmware and 6.15 baseband. I successfully jailbroke the phone and thought i had it unlocked too as i was able to put my (3) sim card in. Apparently not. Scanning various forums i found that installing push doctor might help it. Agiain i thought it had. The phone now showed that it had reception however when attempting to make a call or sms I would get a "restricted network" message. Im over this, PLEASE HELP ME!
mystace
posted 3 years ago
You have to make sure you select the iPad bootroom check mark while jailbreaking your iPhone using redsn0w, then you can unlock your iPhone. Worked for me!
bichoy
posted 3 years ago
i have iphone 3gs 4.1 on baseband 05.14.02 how can i unlock it ?????
offsett
posted 3 years ago
XD.... did u even read some of the articles?
janus
posted 3 years ago
cmon guys this is serious and i really need some help, i used redsnow for the jailbreak.
offsett
posted 3 years ago
u obviouslly didnt read the articels and thats why u wont get an answer. LERN TO READ OH MY COD.
janus
posted 3 years ago
hi, i did everything that the tutorial said, but the iphone crashed and is stuck with the apple logo and wont start, plz help.
janus
posted 3 years ago
iphone 3gs ver 4.2 firmware 05.14 i believe if its indeed a boot loop how do i solve it? please help
offsett
posted 3 years ago
u cannot unlock bb 5.14 u need to use redsn0w and upgrade ur bb to 6.15 THE LOOP is because u jailbreak with official firmware... lol u should never update official firmware. STOP RIGHT HERE. Ur obvioulsy not capable of handeling this kind of modding. Before u even start jb or unlocking read, read read, Get information. What will happen, What can happen. and so on. dont do anything if ur not sure.
TheVixeninpink
posted 3 years ago
Thank you soooo much! PERFECT!
Manoj Kumar
posted 3 years ago
Hi, did you unlock 6.15 with 4.2.1 successfully. if yes plz tell me your experence.
offsett
posted 3 years ago
Thanks alot for the great work on the Unlock. Great Thanks to all the peps who worked on this and stuff. Worked great for me. no Problems.
tzalan
posted 3 years ago
Hi i want a little help.i did jailbreak the iphone 4 of a friend of me and after trying to unlock it using cydia+ultrasnow source.it doesn't open at all.it saws only the apple sign but it doesnt open.what can i do??? please help me fast because my friend is leaving tomorrow evening for cyprus and he needs his iphone
offsett
posted 3 years ago
Bad Luck hommes. What doesnt open? Crydia? Ur Friends iphone? If ur phone only shows the apple sign then u might be in a Boot Loop. What did u use to Jailbreak? Redsn0w? Sn0wbreeze? What kind of Firmware did u have on your Friends Iphone? Are u aware that u cant unlock the newer Modem Firmware for Iphone 4? There are million Informations missiong dude. No wonder noone helped u. sorry.
Kelvin
posted 3 years ago
Hi, I did the jailbreak a few weeks ago and now i'm in 4.1(8B117) and 05.13.04 Modem Firmware... I would want to follow your instructions in unlocking it through Cydia, but I can't seem to connect through wi-fi... i have a No Service signal which means i'm stuck with an iTouch now... :) can you give me an advice on this? Thanks!
LitBun
posted 3 years ago
Just wondering if you found a solution yet because I'm experiencing the same problem? Thanks!
iPhoned-u
posted 3 years ago
I am having the same problem in that the iPhne is not recognizing the wifi network in my home. At times it may see it but then it does not recognize the password or the network. I am stuck as I am unable to get past the next step in Cydia to install Ultrsn0W as entering the Cydia button it scans to load the network and cannot get in. Ugh! 2 days an no phone...I have had to resort to an old nokia to carry me thru until I can get an answer that will bring my iPhone back to life....
british
posted 4 months ago
iPhone 4 can be unlocked by using Telenor Norway Apple iPhone Unlocking Service . It is available at TheUnlockSpot.com .
glen
posted 3 years ago
Works! just installed my Tmobile sim card to check it and have made a few phone calls. Sweet! Thanks!
George28
posted 3 years ago
what kind of firmware do u have ?
Miguel del Río
posted 3 years ago
You're the best, iClarified. Yet again you saved my (girlfriend's, actually) life. iPhone 3G, baseband 05.13.04, iOS 4.2 jailbroken and unlocked with Spain's Movistar carrier. Thanks to saurik, Dev Team, and all others involved as well!
ASSMAN
posted 3 years ago
NEWBIE.....WHAT IPHONE DO U HAVE?... IF IT IS A IPHONE4 ITS EASY U CAN DO IT WITH THE WIZZARD IF IT IS ANYTHING ELSE U NEED TO CHANGE IT TO 6.15 WHICH IS FROM AN IPAD BUT IT WORKS GREAT AS I DID IT ONE ONE OF MY IPHONES AND IT RUNS TERRIFIC .. NEWBIE EVERYTHING CAN BE FOUND IN THE TUORIAL SECTION AND IF NOT GO TO MUSCLENERD SITE
mrSpock
posted 3 years ago
I bought my iphone 4in the US and activated the phone with the inserted ATT sim, without any contract.jailbreak using limera1n, and as unlock I'm using ultrasnow (new). I can use every simcard. But after turning off and restarting the phone it shows only one signal bar and is not connecting to the provider. The settings screen does not show the carrier category. After rebooting up to 10 times the problem is solved until switching off the unit
nodnarb
posted 3 years ago
Has anyone experienced and/or know of a fix for a springboard crash problem when you open an app from within another app. For example, if I click on a link within an email that opens safari, or click on a "open in google maps" option within another app, or if a notification comes in and I click reply to open the app it's from. All of these actions cause the springboard to crash and a message pops up saying "your springboard has just crashed". Then the message says something about mobile substrate has not caused this problem but has prevented it and the phone goes into safe mode with the option to restart the springboard. I'm on: 3g 4.2.1 06.15 Push Doctor installed and t-mobile mms fix installed are the only non essential packages installed that I can think of.
Pedro DC
posted 3 years ago
This tutorial damaged my GPS. I have two iphones 3g both got damaged by ipad baseband. This tutorial should be removed from iclarified.
coop
posted 3 years ago
Hi could any one tell me if my iphone g3 on version 4.1(8b117) firmware 05.14.02 can be unlocked also my wifi has gone can any one help me thanks dave
BeeBee
posted 3 years ago
My 3G is jailbroken & unlocked on 4.2.1 at iPad baseband 06.15.xx and now showing No SIM. How can I fix this?
softis
posted 3 years ago
use ultrasn0w and it vill work
offsett
posted 3 years ago
First if u get no Sim then ur iphone isnt unlocked. cheez is it so hard to read Instructions? Redsn0w = Jailbreak not unlock. Ultrasn0w 2.2 ??? i think = Unlock. They cant make it any Easier.
Jim
posted 3 years ago
Hi, i have 4.2.1 with the baseband 06.15.. I can jailbreak my phone but when i go to cydia and install ultrasnow, and after reboot , my phone doesnt startup , all i can see is the apple logo.. I tried 3 times but it doesnt work! PLS HELP! its a 3gs
Carpe
posted 3 years ago
Hi man, have you found a fix for this yet? I have the same problem...I know how you can restore your phone so that I still boots, but I have no idea how to properly unlock it...
wezz69
posted 3 years ago
Well if you have an iphone 4.2.1 and you jailbroke it, you now have to tether oit to boot up. in other words if your battery dies, you turn it off or even if you install something through cydia and need to reboot device, you have to literally plug it in and use the jailbreak software to boot your iphone every single time!! Gutted for ya, thats why its a tethered jailbreak only
arman
posted 3 years ago
unlock iphone 3g with ios4.2.1 hi i looked at the tut on ine i tried to unlock my iphone 3g but when i installed a ultrasn0w my iphone did not find any network i resart , nothing changed tried to turm the airplane mode on and off still was the same so i had to remove it i have ios4.2.1 firmware version 05.15.04
era
posted 3 years ago
my iphone 3gs and 3g have refused to restore after using custom firmware 4.2.1. it worked for a while and later crashed but now i cannot restore with original firmware 4.2.1 or custom firmware 4.1 0r 4.2.1 but rather shows error at 1016. please help me
osman
posted 3 years ago
I had a smilar error. Try using a different computer to restore. That seemed to work for me. The other thing you can do is update your iTunes software to the latest version but that will mean your phone will be locked if it was previously unlocked and you will probably loose your jailbreak as well. good luck
assman
posted 3 years ago
BeeBee read assmans information below foloow it and ull be able to fix ur problem thanks
chathuO2
posted 3 years ago
Can I jailbreak and unlock 4.2.1 iPhone 4 on Windows with modem firmware 03.10.01? any ideas?????????????
newbie
posted 3 years ago
i've got the same issue. Does anyone have advice they'd like to share on unlocking iPhone 4.2.1 on baseband 03.10.01??
ASSMAN
posted 3 years ago
JIM UR 4.2.1 IS SHIT THATS WHY U HAVE THE SAME PROBLEM LIKE MANY GET RID OF IT AND GET JUST 4.2
chathuO2
posted 3 years ago
please instruct us how to get 4.2 please.
newbie
posted 3 years ago
Assman, what about the flipping baseband? doesn\'t that pose a problem in unlocking? it seems to me that\'s the problem..baseband 03.10.01. no one seems to have a solution for that
innovative
posted 5 months ago
chathuO2 - December 8, 2010 at 2:56pm Can I jailbreak and unlock 4.2.1 iPhone 4 on Windows with modem firmware 03.10.01? any ideas????????????? You can unlcok your iPhone 4 by using Remote unlocking method . you can get it from any of the online vendors like Mobile-Unlocker.com to unlock it .
Newbi
posted 3 years ago
hi everyone, does anyone know if there is an unlock for the iPhone 4 (4.1 Firmwahre) and baseband 02.10.04? My phone is locked to AT&T. When turn it on, it says waiting for activation. Do I need to activate it first in order to unlock it? thanks for your help everyone.
ASSMAN
posted 3 years ago
JIM.... THATS EASY ALL U HAVE TO DO IS CONECT IT TO ITUNES AND DOWNLOAD 4.2 THEN REBOOT AND UR PROBLEM IS SOLVED ... THATS WHAT EVERYONE DOES HOPE THIS HELPS
Oszi
posted 3 years ago
Is it possible to unlock the iPhone 4 (4.1 Firmwahre) and baseband 02.10.04? Do i need to upgrade to 4.2 firmware ? Is there an unlock and jailbreak for the 4.2 firmware on iphone 4 Please help
osman
posted 3 years ago
Hey Mark et All, It seems like i've messed up my phone while trying different unlock methods. it's stuck in the restore mode (with itunes and USB showing on screen). I can't seem to restore it. keeps giving me an error message. I've tried using the Tiny Umbrella software to kick it out restore mode...didn't work. I tried Option+Restore using a saved 4.1 firmware ....didn't work. I even tried Restore + Upgrade to 4.2.1. still gives me an error 1013 or something like that. Do you have any idea how I could fix that? your advice would be much appreciated. thanks man.
Arjun
posted 3 years ago
Use redsnow to put in pwnage state and then restore.
Savvas
posted 3 years ago
Hey! I have an iPhone 3G with ios 3.0.1 on baseband 04.26.08. Is it possible for me to unlock on ios 4.2.1 without changing the baseband???
osman
posted 3 years ago
i've got an iphone 4. running firmware 4.1 (phone not yet activated just bought it from the states and it's locked to AT&T) base band is 02.10.04 Does anyone know if this can be Jail broken and unlocked? How can I upgrade my base band. it seems that you could unlock if you had other basebands
Mark
posted 3 years ago
sorry you cannot do any unlocking with your unit (locked iphone 4 already on 4.1) at this time. no one will be able to give you an estimate of when the new unlock will be released, that can only be answered by the dev team who develops the unlocks.
osman
posted 3 years ago
Hey Mark, It seems like i've messed up my phone. it's stuck in the restore mode (with itunes and USB showing on screen). I can't seem to restore it. keeps giving me an error message. I've tried using the Tiny Umbrella software to kick it out restore mode...didn't work. I tried Option+Restore using a saved 4.1 firmware ....didn't work. I even tried Restore + Upgrade to 4.2.1. still gives me an error 1013 or something like that. Do you have any idea how I could fix that? your advice would be much appreciated. thanks man.
navanu
posted 3 years ago
Just comment out the entry in hosts file and you will be good to go.
osman
posted 3 years ago
navanu, Please clarify. I don't understand what you mean? your help is much appreciated.
chathuO2
posted 3 years ago
Can I jailbreak and unlock 4.2.1 iPhone 4 on Windows with modem firmware 03.10.01? any ideas?????????????
Mark
posted 3 years ago
I can answer you with absolutely certainty. You cannot unlock your iphone 4 on 4.2.1 at this time. Also, no one will be able to give you an estimate of when the new unlock will be released, that can only be answered by the dev team who develops the unlocks.
chathuO2
posted 3 years ago
well Mark is there anyway i can downgrade my iphone from 4.2.1??
iphone user
posted 3 years ago
Thanks for this.. I have iphone 3g and was stuck with 4.1 and tried everything but could not get phone to unlock.. Finally i used this after updating 6.15 baseband and 4.2.1 firmware and this worked perfectly.. Now my phone is jailbroken and unlocked
Jim Febrian
posted 3 years ago
I managed to unlock my 3G Iphone, but other probs came up 1. The battery drains very fast 2. It can't be charged Can someone tell me how to fix this ? Thanks Jim
KC
posted 3 years ago
How did you get 6.15? ive update an 3g iphone from 3.12 to 4.2.1 and now im stuck on 05.15.04. is there an unlock already ? any clues about a date? thank u
jay
posted 3 years ago
hi i did the same thing like u everything works but does not show up the service provider help me how u managed
Princeton
posted 3 years ago
"Upgraded" to 6.15.00 (the iPad .ipsw), then used redsn0w 0.9.6b6 to install Cydia and unlock with repo666. Works for my iPhone 3GS: UK O2 --> US AT&T Pay-as-you-go SIM card! THANK YOU!!!
zazaer1
posted 3 years ago
Hi i updated 3g iphone OS 4.2.1 to BB 16.15.00 und after restoring i stuck. Shell i throw it to the garbage bag or i have to wait for some solution? Thanks
mrock
posted 3 years ago
go here. Helped me http://forum.gsmhosting.com/vbb/f456/how-fix-error-1015-iphone-3g-4-2-1-a-1151316/index6.html#post6642083
ASSMAN
posted 3 years ago
OBOY WHY THE HECK CANT U UNLOCK UR IPHONE GEO AND THE DEVISON TEAM GOT U A FIX AND U STILL CANT DO IT?? MY GOD U DONT DESERVE TO HAVE AN IPHONE ,, HOW MUCH BETTER DO U NEED THE INSTRUCTIONS ARE SO EASY THANKS TO GEO HOT AND UR ALL LIKE A BUNCH OF SILLY KIDS MY GOD
innovative
posted 5 months ago
There are a lot of techniques available to unlock iphone 4 : 1. By using unlocking software like cydia 2. Imei unlocking method 3. To unlock iphone from service provider 4. By using Remote unlocking service which is available at Simpleunlocking.com
halidook
posted 3 years ago
Hi I've also jailbroke and unlocked my 3G using ultra snow on BB 06.15.00. When i put in the t-mobile sim card it i get "No Signal" display. However, if i turn off the 3G the phone recognize the t-mobile sim card. Is this normal? If not please help......
Meet
posted 3 years ago
Thank you iClarified..!! done the jailbreak n unlock by ma self.. no problem at all..!! love u team..!! keep it up..!!!
A.Prince
posted 3 years ago
Advice Please...I have a jailbroken/unlocked iphone 4 running on 4.01 and 1.59.00. Everything works just fine EXCEPT I can not change my APN so that I can use data. I have tried the APN changers from Unlockit.nz and benm.at but either I am doing it wrong (high degree of probablilty!) or it just doens't work for me. Can I upgrade to 4.1 and get the ability to set my APN manually?
Mani
posted 3 years ago
Use Iphone config utility tool to set APN configuration. i am using it on Iphone4 with 4.02 version
FFA
posted 3 years ago
hi I have this frameware 05.15.04 and I jailbreak my iphone now I can't unlock my network please can someone help me thx
ichmau
posted 3 years ago
I have the same problem, I JB the Iphone in 4.2 bb 5.14 Do you think ité necessary tu upgrade to 6.15 so the network works?
sibin
posted 3 years ago
Hi, I am facing the same issue. I was using an iPhone 3G unlocked with Ultrasnow. It was on iOS 4.0 with baseband 5.13.04. Yesterday I was trying to update it to iOS 4.2.1 using Redsnow (with preserving its baseband) as given on jailbreaking tutorial. During update its baseband got updated to 5.15.04 unintentionally. I knew there is no unlock for baseband 5.15.04 yet, so again I tried to update the baseband to 6.15.00 with Redsnow. But it got stuck with the message ' Waiting to Reboot' for hours. Then I disconnected the phone after that and installed the custom ispw again and. But once again it got stuck with the same message. Somehow managed to jailbreak it iOS 4.2.1 and baseband 5.15.04. I am afraid that the mobile is locked for ever. Someone please help me to unlock the phone again. Thanks
Johnny
posted 3 years ago
Exactly the same problem as sibin with my 2009 week 26, 3GS. Updating to 4.2.1 from 4.1 also bumped the baseband up to 5.15.04. "Waiting to reboot" using Redsnow. Going back to Pwnage 4.1.3... can't authorize with Apple (fails). What are we missing? Thanks for the time!
5huck5
posted 3 years ago
Can I jailbreak and unlock 4.2.1 iPhone 4 Windows with modem firmware 03.10.01?
chathuO2
posted 3 years ago
good question, anyone with any ideas for this?? i have the same problem :(
Mark
posted 3 years ago
I can answer you with absolutely certainty. Yes you can jailbreak, but you can NOT unlock your iphone 4 on 4.2.1 at this time. Also, no one will be able to give you an estimate of when the new unlock will be released, that can only be answered by the dev team who develops the unlocks.
kims
posted 3 years ago
i can't get my data plan to work and Tmobile is confused, too and can't help me any more. iphone 4. on 4.0.2, baseband 1.59.00, jailbroken with greenpoison and unlocked with ultrasnow. i can make calls but can't get email or internet. tmobile says everything looks good on their end, we tried 3 different APN settings and has no explaination. can anyone help?
jock
posted 3 years ago
Hi all 3GS, old bootrom, running iOS4.0. Unlocked, and I need the unlock. Trying to update to iOS4.2.1 without touching my current modem firmware (05.11.07). I would appreciate some help :) ps: Great work you guys!! Suggestion: add fields in the Comment section for iPhone version (3G, 3GS, 4), old/new bootrom, modem firmware, current/new iOS so we can search easily between posts that are similar to our situation.
ASSMAN
posted 3 years ago
ALL U BASTARDS STOP USING MY NAME U STUPID RETARDS THERE IS ONLY ONE ASSMAN SO CUT IT OUT
Jumper
posted 3 years ago
Having used the latest instructions to both jailbreak and unlock my Iphone 3G using the latest iPad firmware 16.05. All went well with both operations however on completion my phone wouldnt lock onto a phone signal. Several reboots later and still nothing, so I attempted to go through the Jailbreak/unlock procedure again. My problem now is that I am caught in a loop and can not use itunes to restore the ipsw. I have spent hours on the web looking but to no avail. Any ideas please. Many thanks
alex
posted 3 years ago
same problem here HELP please!!!
benro
posted 3 years ago
does it have anything to do with location? i'm in the UAE.
benro
posted 3 years ago
i got as far as typing repo666.ultrasn0w.com...after that it only tells me that the repository cannot be found. it says as follows: "the indicated repository could not be found. this could be because you are trying to add a legacy installer repository (these are not supported). also this interface is only capable of working with exact repository and are having issues please contact cydia..." any ideas why this is coming?
Muhammad Ismail
posted 3 years ago
I was having same Problem But after installing HotspotShield VPN it's Solved..
selva
posted 3 years ago
Amazing, it worked like a charm, after i restored the firmware first my phone was displaying a message that i can make only emergency calls which is not posted here. but i went a head and used redsnow, it did some patching and i could see a black interface where it was updating the software and when it rebooted i could see the spring board. then i followed the unlock instruction and it woked. after 3 months of waiting i could finally unlock my phone. my phone configuration before jailbreak and unlock was 3gs 4.1 bb 5.14.02. cheers thank you very much dev team.
Heellp
posted 3 years ago
Pls help me. I have a 3GS 05.14.2 n I can't unlock it. Why steps did u use??? Thx
stuck
posted 3 years ago
you write: "but i went a head and used redsnow...". Did you mean to say "ultrasn0w"?
panimalar
posted 10 months ago
Hi Heellp whether you are in need to unlock your iphone 3gs from network lock ..Then you can have a look at sites like Classicunlocking.com here they will unlock your iphone 3gs from network lock permanently using remote unlocking service for affordable cost due to this your iphone won't get locked again in future even if you update your iphone ...
eddie
posted 3 years ago
hi, ihave an iphone 3g and install ydia and downloaded and install ultrasn0w and did everything, but when i install my tmobile chip it tells me no sim or unrecgonize sim, can you please help me out no this one
infamouz
posted 3 years ago
i have that problem too...when i insert other sim card it show no sim but when i insert original sim card no problem at all..pls help us.
Muhammad
posted 3 years ago
i jailbreak my iphone 3g with 4.2.1 with base band 06.15.00 but when i try to unlock by repo666.ultrasnow it gave me error repository could not be found plese some one help me with that.
Abdul
posted 3 years ago
its not repo666.ultrasnow its repo666.ultrasn0w its a zero bro
MUHAMMAD
posted 3 years ago
My Problem iz Solved after installing HOTSPOTSHIELD in iphone
ACE
posted 3 years ago
Guys what about the iPhone 4. if we upgrade to the 4.1.2 what would happen to the baseband? and will be able to unlock?
safrassm
posted 3 years ago
woooooooooooooow i have i phone 3g 5.14 base band and just hour ago update to 4.2.1 and jailbreak and follow ' How to Unlock the i Phone 4, 3GS, 3G Using UltraSn0w ' instruction work charm & beautifully thanks for who make this unlock and my favorite site iclarified.com and all i am really happy sorry for the grammer mistake
Nashito
posted 3 years ago
GUYS!!! kindly read the instruction. IT SAYS YOU NEED TO UPGRADE YOUR modem firmware to 06.15 if your MODEM FIRMWARE IS 05.14 and ABOVE. So don't be suprise if you can't unlock your IPHONE 3G/3GS if you upgraded the VERSION to 4.1 since your MODEM FIRMWARE will change to 5.14 or HIGHER after the upgrade. NOTE: ULTRASNOW UNLOCK WILL ONLY WORK for 5.13.04 and 06.15. IF YOUR USING 05.14 or 05.15 then UPGRADE IT TO 06.15 to UNLOCK IT USING ULTRASNOW 1.2.
aelly
posted 3 years ago
thank you very much. this was what i blur at.. =)
Nashito
posted 3 years ago
no problem:)
thomas
posted 3 years ago
So should I upgrade my iPhone 4 4.01 baseband 1.59 then use unlock. Another iPhone 4 at 4.1 2.10 should I also upgrade that?
markus
posted 3 years ago
I have iPhone 3G baseband 5.13.04 firmware 4 since May working unlocked. I did upgrade ultrasnow to 1.2 yesterday and the mobile connection stopped working (even with the original simcard). It cannot connect with any operator, no signal. I cannot even see the operators list from setup screen. Therefore, wi-fi is working. If you could advise. Many thanks.
Nashito
posted 3 years ago
Hi markus. Its normal for you to encounter this type of problem, because your upgraded the version of ULTRASN0W to 1.2. To fix this kindly uninstall or remove ULTRASN0W and then redownload it AGAIN then install it. It should fix it after your redownload and reinstall the fresh copy of ULTRASN0W 1.2:) 100% it will detect your network carrier. Let me know if this works.
ichmau
posted 3 years ago
Hi Nashito! I have a 3g Iphone i tried to unlocked it but my network doesn`t work do you think that`s because is 5.15? do I need to upgrade to 6.15 so my network works? Thanks
markus
posted 3 years ago
Thank you very much. uninstalled and installed sorted.
Dwight
posted 3 years ago
Hey wats up guys just did this on my iphone 3g runnin 4.2.1 modem firmware 05.15.04 and it worked just fine...if it doesnt work 4 u u might have to jailbreak to to 4.2.1 and then do the unlock but it works fine...i think i used ultrasnow/redsnow to jailbreak ....n e way thanks iclarified
patrik
posted 3 years ago
05.14.02 to iOS4.2 iphone??
Killergtz
posted 3 years ago
OMG I haven't done this in a long time and I did a really stupid mistake by using the 4.1 without researching. When are we suppose to get the unlock for the 4.1 jb???? I can't use my phone until it comes out. Guys please please please help!!!!!
mary
posted 3 years ago
assman i dont think you will be able ever to unlock a 3g 4.1 with windows i was told that this unlock is not possible and thats why every other firmeare was done ok except 4.1 with a 3g phone sorry but at least you know now
Paula
posted 3 years ago
Já existe o desbloqueio para o firmware 4.1 3G 8 G?
jewelstones
posted 3 years ago
No hay todavia!
ASSMAN
posted 3 years ago
WELL THANK U FOR UR REPLY MARY BUT I THINK U WERE MISINFORMED 3G FOR A 4.1 WINDOW OS WILL BE RELEASED THIS MONTH BUT WHEN IS THE QUESTION
KP
posted 3 years ago
I have unlock my iPhone 4 with JB and ultrasnow with the above steps and things are all working fine. However there is a bugging problem with losing the signal totally and it says "no service" or I just lose the data IP totally and can't get surfing... Is anyone having the same problem?
dciso
posted 3 years ago
Ive got iPhone 4 on 4.0.2, JB and hacktivated with limera1n. Ive unlocked it with ultrasn0w but I keep losing the data ip over 3g. Everything else is fine, was wondering if its to do with the hacktivation? Cheers
ACE
posted 3 years ago
I've always have this problem since my 3Gs loosing calls when on edge, with the iphone 4 from time to time i totally loose the signal and i get sim failure i have to restart sometimes once sometimes twice to have it work back :S
Zeener
posted 3 years ago
Hi, I have got an iphone 4 with ios 4.0.2 with basband 1.59.00 and i have used it since I purchased it Since you said your phone is jailbroken and unlocked. Could you let me know how to do it. Thanks
innovative
posted 5 months ago
There are a lot of techniques available to unlock iphone 4 , 3gs , 3g : 1. By using unlocking software like cydia 2. Imei unlocking method 3. To unlock iphone from service provider 4. By using Remote unlocking service which is available at Unlocking4U.com
Kirsty
posted 3 years ago
I have a jailbroken iPhone 3GS and am on 05.11.07 baseband but this does not work. It appears to all work as per the instructions, but after i restarted the phone it just says 'searching...' and doesn't change.
jesus leon
posted 3 years ago
Hey, I'm just curious if you ever got an answer to your question, can you share what you've heard with me please?
john
posted 3 years ago
YES I had the same problem!
Jeremy
posted 3 years ago
Yup, me too. I'm in Canada, on Fido (Rogers), and I don't have a data plan. Could that be part of it?
Surf121
posted 3 years ago
I need help. I unlocked my Iphone 4 on 4.1 with ultrasnow, modem firmware 01.59.00 and everything seesm to work like a charm, but when I reboot my phone I sometimes loose my cellular data connection. Any clues on what is wrong?
Dizzle
posted 3 years ago
Same here. I have to remove Ultrasnow through Cydia to get it working again. I hope this issue is addressed soon. Good luck.
ASSMAN
posted 3 years ago
WHEN IN NOVEMBER WILL 4.2 COME OUT CUS IM WAITING FOR A 3G 4.1 TO UNLOCK AND TO JB MUSCLENERD SAY NOVEMBER BUT ANYONE HERE WHEN IN NOVEMBER?? PLEASE CAN YOU REPLY
Rajesh Paul
posted 3 years ago
Hi some please help me ... i did follow all these steps and it worked fine but my edge internet is not working. I tried to reset network settings but does not help. I also installed the custom APN settings but does not help .... wat do i need to do ... iphone 4 FW 4.0.2 ... any help on this is greatly appreciated.
Shankar
posted 3 years ago
Please let me know Unlcoke is based on Baseband(modemfirmware) or OS Version?
Sarm
posted 3 years ago
After downgrade from 4.1OS to 3.1.3, ultrason0w NOT WORKING..............Please help
jeneral person
posted 3 years ago
I have an iphone 3G. I loaded the 4.0 OS using the itunes software. Then jailbroke it using redsn0w. Then I downgraded the baseband using fuzzu grade downloader http://www.blogsdna.com/9259/unlock-iphone-os-4-0-running-on-iphone-3g-with-ultrasn0w-0-92.htm Afterwards, I loaded cydia and got ultrasnow from the web. Ran it. It could not unlock it multiple times. I restarted again and again and again. Used a different simple mobile sim, did all of that. It still did not work. SHould I go back to 3.1.3 or what??
Rax
posted 3 years ago
Hey, i got an jb iPhone 4 with 4.1 on 01.59.00 .. when i install ultrasnow it always runs the system then it will unlock my simcard and on the screen stands "restart springboard" and nothing more happens? what could it be? what i am doing wrong?
Randall3G
posted 3 years ago
I searched through the threads and couldn't find an answer to my problem, so here it is. I JBed my 3G with RedSn0w and everything was fine. After I unlocked it with UltraSn0w though, it runs extremely slow. It's as if the phone has a 3 second delay. I'm running 4.1. I would tell you the baseband, but that seems to have disappeared. Also, I didn't enable multitasking. Is there anything I can do to make my phone run faster? Can I redo the jailbreak or unlock? Any help would be really appreciated. Thanks.
marty
posted 3 years ago
SAM HOW DID U DOWNGRADE FROM 4.1 I HAVE BEEN TRYING TO DO THIS FOR DAYS NOW CAN U POST THIS LINK tHANKING U IN ADVACE SAM
cheese
posted 3 years ago
your phone is slow because you have a 3g, 3g sucks on 3.1.3 and higher
jewelstones
posted 3 years ago
I´ve updated my iPhone 3G to 4.1; I am now unable to unlock my 3G after jailbreaking to 4.1 with the instruction here on iClarified. Ultrasnow is unable to unlock the 05.14.02 modem firmware! Does anyone know how to resolve this?
Rene Santos
posted 3 years ago
I've the same problem. Did you find any solution? Thanks and regards, Rene
jewelstones
posted 3 years ago
I think, we have to still wait!
Rene Santos
posted 3 years ago
Thanks for your prompt answer. So, let us be patient and wait. Have a nice weekend. Regards, Renê.
Awais
posted 3 years ago
hello iclarified i need some help i have iphone 3gs on os 3.1.3 i want to update it on os 4.0.1 and i live in pakistan and here noting sim card supports to itunes tell me if i update my iphone will it go to recovery mode? or if it will go to recovery mode is there any option that i can update my iphone and it will not go to recovery mode plz help me
nawid
posted 3 years ago
tired of searching for software. can some one please please tell me how to jailbreak/unlcok iphone 3gs ios 4.1 basehand 05.14.02 ? the toturials showing unlocked once, i cant even go to that screen. my iphone is stucked on itunes and usb icon. some one please hellp me get out of this damn thing... 46xhb
sdfrio
posted 3 years ago
Like other posts here I am now unable to unlock my 3G after jailbreaking to 4.1 with the instruction here on iClarified. Ultrasnow is unable to unlock the 05.14.02 modem firmware! Does anyone know how to resolve this? I have to ask, why would iClarified post this jailbreak tutorial without including a warning about this?!
nawid
posted 3 years ago
how could you jailbreak it? mine is the same firmware but 3gs. and i cant find any software to jailbreak or unlock it.
Sarm
posted 3 years ago
Same problem..........did you get any solution? Please helppppppppp :(
Nashito
posted 3 years ago
GUYS!!! kindly read the instruction. IT SAYS YOU NEED TO UPGRADE YOUR modem firmware to 06.15 if your MODEM FIRMWARE IS 05.14 and ABOVE. So don't be suprise if you can't unlock your IPHONE 3G/3GS if you upgraded the VERSION to 4.1 since your MODEM FIRMWARE will change to 5.14 or HIGHER after the upgrade. NOTE: ULTRASNOW UNLOCK WILL ONLY WORK for 5.13.04 and 06.15. IF YOUR USING 05.14 or 05.15 then UPGRADE IT TO 06.15 to UNLOCK IT USING ULTRASNOW 1.2.
Jose 3G
posted 3 years ago
I have updated my iphone 3g with the new firmware 4.1 and jailbreak it as this tutorial show but now i lost my unlock.. Also, fuzzyband does not work for my phone because the bootloader is not 05.08 it is 06.02...so I need some help please!!!!
Simon Francklin
posted 3 years ago
I've got a 3Gs running on 4.0.1 with firmware 05.13.04. I've unlocked/jailbroken it through jailbreakme.com and using ultrasn0w. but i still cant get past the wrong sim page once i put a different network sim in, but do get full signal bar and it shows that the carrier network is working. Please help !!!!!!!!
john
posted 3 years ago
Had the same problems.Had unlocked an AT&T phone with a generic unlock sim from Ebay this did the jailbreak fine but no unlock.Just got a AT&T sim from the US followed the unlock again on this sim then put my O2 sim in and its working. Hope this may help it took me 2 months to get it sorted.
beijingiphonerepair.com
posted 3 years ago
add source: http://cydia.pushfix.info in Cydia Then install Haktivation patch
Simon Francklin
posted 3 years ago
Thank you both so much, all up and running.
BeeGee
posted 3 years ago
First of all, thank you to all those who have developed, shared, and helped. As I've just followed the tutorial on unlocking, I was wondering if anyone could confirm it working? Is there a way I can tell if my phone is unlocked before moving out of country? I'm running 4.0.1 8A306 firmware 5.13.04. Thanks.
Manikandan
posted 3 years ago
Friends, Can anyone confirm whether this unlock will work with iphone4 4.0.1 firmware. Thanks
panimalar
posted 11 months ago
Hi Manikandan i have no idea about that whether this service will help to unlock your iphone 4 from network lock ..But i can sure tell that you can easily unlock iphone 4 from network lock with the help of online providers like Superunlockcodes.com here they will unlock your iphone permanently using remote unlocking service for affordable cost ...
Manikandan
posted 3 years ago
Hi, Can anyone confirm whether this lock work with iphone4 4.0.1 firmware? Thanks in advance
lucke
posted 3 years ago
anyone else having issues with ultrasnow when switching sim cards?
Sam
posted 3 years ago
My iphone got stuck on apple logo and tried restoring through tinyumberalla to be on the same version which was 4.0.1 but forced to get it updated with the latest version and unfortunately baseband also updated. Any idea when the unlock will come out?
Ceav
posted 3 years ago
It works, but it will drain your battery in less than a day, had to do a restore to fix it.
Bro
posted 3 years ago
When will the unlock for firmware 05.14.02 out? My iphone is 3.1.3 and the firmware is 05.14.02. I jailbreak it already but i cannot unlock it. when is the unlock will be available?
harshad
posted 3 years ago
hi i have iphone 3g i was down load ituens new version but anforchunatli my iphone is gone emergincy call. after that i was open lock of iphone but i have some problem in network of iphone. my iphone have 3.1.3(7e18)version and modem firmware 05.14.02. it not support of network in india.so pls help me
nawid
posted 3 years ago
hey man my 3gs ios 4.1 , basehand 05.14.02, is on itune and usb icon. how to jailbreak it? befor it was 3.0,3 firmware i upgrade it to 4.1 and now it is locked. cant do anything except emergency calls. :( please help me man..
british
posted 4 months ago
Bro - September 15, 2010 at 4:42pm When will the unlock for firmware 05.14.02 out? My iphone is 3.1.3 and the firmware is 05.14.02. I jailbreak it already but i cannot unlock it. when is the unlock will be available? Hi, you can unlock your iPhone by using Remote unlocking method . You can get it from any of the online vendors like TheUnlockSpot.com to unlock it .
Avinash
posted 3 years ago
I have iphone 3gs 3.1.2 OS with 5.11.07 modem version. It's jailbroken using PwnageTool. Now when I go to unlock it using ultrasn0w or blacksn0w as given here, I am getting error "Error: Running Sub-process /usr/bin/dpkg returned an error code (1)" while installing these packages. Next error is "/var/cache/apt/archives/firmware-sbin_0-1_iphonesos-arm.deb subprocess pre-installation script returned error exit status 1""
notyou83
posted 3 years ago
any love for us 2G iphone users?
Mo
posted 3 years ago
Hi I successfully jailbroke my iphone 3gs to 4.0.1 but the problem is that it is not allowing me to use my sim. I have downloaded ultrasn0w but when i put my vodafone ireland's sim in it it says sim not supported and connect to itunes.. when i do itunes says ''The SIM card inserted in this iPhone does not appear to be supported. ONly compatible SIM cards from a supported Carrier may be used to activate iPHone. Please insert the SIM card that came with your iPhone or visit a supported Carrier's store to receive a replacement SIM card.'' Strangely I can receive calls and messages after using ultrasn0w but i cant make calls or send msgs since its stuck on emergency screen. Please Help!
nauman
posted 3 years ago
hey i m getting same prob, id u find any solution? if yeslet me knoplz
john
posted 3 years ago
Got all the same problems as you but my phone was unlocked for 12 hours then lost the unlock the jailbreak still works.Have tried lots of times to unlock but no luck/ baseband 05.13.04 Firmwere 4.0 Makes a handy PDA
Emil Ludvigsson
posted 3 years ago
You should go to search section in cydia and install Hacktivation, that will remove the put in a sim card screen.
Simon Francklin
posted 3 years ago
i've tried to find the Hacktivation from cydia search section but nothing comes up ? any help
lv
posted 3 years ago
thank you folks! I received a special hug from my kid after jailbreak and unlock her iphone. I appreciate very much your well done job.
paulsiew31
posted 3 years ago
Ok, guys….Strange thing happened today. Let me start now…. I have been using a 3gs (ver. 4.0.1 [8A306] Modem FW:05.13.04) and jailbroken with jailbreakme. Today just got hold of my new iphone 4, did the necessary activation and sync’ed to my present identity/account. Afterwhich, when the iphone 4 displayed its springboard with all my necessary purchased apps (without Cydia and etc.), I discovered my carrier has been changed to my customised name ‘paulsiew’ (which my previous 3gs had fakecarrier installed) and not default telco name, apps from installous which went into the iphone 4 was shazam, talking carl, appbox pro, etc came into the springboard too…however not entire library of apps from installous was sync’ed. My current NEW iphone 4 is a new unit and its on 4.0.2 version. How is it possible for it to sync certain ‘jailbroken’ apps/items back into this un-JB unit? Possible for me to rollback to previous version? Please advise…. Thanks.
boogie
posted 3 years ago
hey yall gave me this video but it doesnt help downgrade my iphone4 to 4.0.1 i get the error 3194 do u have another suggestion thanks
boogie
posted 3 years ago
i just got the iphone 4 yesterday i have the new version 4.0.2 i keep getting errors 3194 i want to go to 4.0.1 can u help plz
wezz69
posted 3 years ago
NOT AT ALL POSSIBLE LOL. UNTIL JB IS RELEASED FOR THE NEXT MAJOR F/W UPDATE YOU ARE LITERALLY STUCK WITH A APPLE CONTROLLED iPHONE PMSL. GET IT ON EBAY, SELL IT (they are going for very high prices, i sold my 16gb for £739... RESULT!!!) AND THEN BUY ANOTHER iPHONE 4 FROM EBAY WITH 4.0 OR 4.0.1
blackarrowpro
posted 3 years ago
Try this: http://www.iphoneheat.com/2010/07/downgrade-ios-4-1-to-4-3-1-3-3-1-2-iphone-4-3gs-ipod-touch/ I just downgraded my iPhone from 4.0.1 to 4.0 and it worked a charm. I just did it an hour ago, so I know it is definitely up and running. Good luck!
Björn Ericsson
posted 3 years ago
My iPhone 4 will not switch between Edge and 3G using ultrasn0w. I can only get 3G if I explicitly select that operator, but then it will not fall back to 2G. I only get Edge if I select automatic operator. Anybody with similar problem or a solution? /BE
Frank
posted 3 years ago
Just wanted to drop a note and say THANK YOU. Utilizing the Jailbreak Wizard and Ultrasn0w tools, I am now able to use my iPhone 3GS version 3.1.3 (7E18) firmware 05.12.01. Put T-Mobile sim card, and it works great. At this time, I am only using voice and texting, as I have excellent Wi-Fi access at the vast majority of places I go. I also discovered that somehow, without deleting anything (apps, photos, and music), or adding anything, the available memory jumped from 993 MB to 2.2 GB. Trying, with help, to figure that one out. Thanks to all who made it possible.
Chris
posted 3 years ago
Will this unlock allow for use with the at&t prepaid plans?
wezz69
posted 3 years ago
IT IS AN UNLOCK durrr! IT UNLOCKS THE iPHONE PERIOD NO MATTER WHETHER IS BOUGHT PREPAY OR PAY MONTHLY, SO AS LONG AS YOU DO NOT OWN A 4.0.2 YOU WILL BE FINE, WELL AS LONG AS ITS JBoken
Guy
posted 3 years ago
I was told that j have to have legacy in cydia for my mms to work on my iPhone 3G but it's not there. What do I have to do to put it in cydia. Help me please
ACE
posted 3 years ago
Hey something interesting, After receiving my iPhone 4 today from eBay it was factory sealed, I opened it to find that it is on the 4.0, and itunes shows that there is a new software update for my iPhone 4.0.2, but i've thought of trying restoring to the 4.0.1, thus i downloaded the firmware and pressed Shift and clicked restore and i managed to upgrade it from the 4.0 to the 4.0.1 although iTunes is showing the new software i've jailbreak it and unlocked it as well. it seems we are still able to do that at least for now.
Ameree
posted 3 years ago
I absolutely love that you have these tutorials here. Recommended to all of my friends. You guys are doing a great thing here, and I think you all deserve a THANK YOU!
chucky
posted 3 years ago
hello. I just jailbroken my iphone 4g and i think i unlocked it with ultra snow. i cut my simcard also and did not cut into the gold area of the sim card. when i put it in. i get the "no sim card" error. how can I fix it. I'm with tmobile.
Vince Le
posted 3 years ago
I am having the exact problem, please help!
joy
posted 3 years ago
turn on the airplane mode n then off it shud work or if not turn off device n back on n dont 4get to turn off ur 3g
Jose Pais
posted 3 years ago
It happeened to my in my 1st trial. I did cut badly my sim card. Please verify if the signs of the contacts that your iphone make in the mini sim card are in the same place as a regular phone in the sim card (before cuted). to Puto mine in contact correct, I was forced to cut a little part of the metalic of the sim card, to transform it in a mini sim. Please verify if you are cuttting in the correct side of the sim. It is certainly a problem of missmatching the point of contact of the pins in the phone with the correct metalic places of the mini sim. As I told you, it happened to me too,. If possible use a regular sim as reference (please try to see the small signs (trays) that the pins of a normal phone does ina sim, and then try to allign that with the same signs that your iphone does. Use it as a reference to align them. In my case, yes I was obliged to cut a little beat less then a 1mm of the metalic part of my sim, but them I am in Portugal, and I do not know the kind of sim your provider uses. Best of luck, ~José
WJ
posted 3 years ago
I unlock my 3GS and everything works fine except I cannot connect to the internet through "Edge" and I can not enter my MMS and Cellular Data anywhere. Can anyone PLEASE HELP!!!! is there a fix for this issue?? Thanks
RAJNISH AGARWAL
posted 3 years ago
THANKS SO MUCH. AT LAST I COULD USE MY PHONE.
Clayton
posted 3 years ago
Hi, I have an iPhone 4 and I did manage to jailbreak and unlock it. If I decide to upgrade to IOS 4.0.1. Will the unlock be removed? Thanks
innovative
posted 2 months ago
Clayton - August 11, 2010 at 4:34pm Hi, I have an iPhone 4 and I did manage to jailbreak and unlock it. If I decide to upgrade to IOS 4.0.1. Will the unlock be removed? Thanks Reply · Like · Mark as Spam Hi clayton , If you have temporary unlocked iPhone 4, surely your iPhone gets locked during update process . So, use Remote unlocking method to unlock your iPhone 4 . It is one of the permanent unlocking solution for iPhone . To get it , contact the provider SuperUnlockCodes.com
Hector
posted 3 years ago
Excelent tutorial, I had my iphone (3GS, v4.0) out of service for two months, now im ready to go!!!
hongsandvik
posted 3 years ago
Hi i got iphone 4 & iphone 3gs version 4.0.1 , already unlocked & jailbroken , but how to get MMS please help any body know how please ?
Mike
posted 3 years ago
restore from backup of the phone before u jailbroke it
WJ
posted 3 years ago
Hi, I have the same problem and I tried restoring from back up and still doesn't work anybody has any suggestions?? I need my MMS and also my "edge" internet is not working I can't enter the configuration....PLEASE HELP!!!
Shahryar
posted 3 years ago
Somewhere in settings you have to put in network and mms info. I had to do this for t-mobile after I jailbroke and unlocked my recently (used) purchased iPhone 3gs. I searched online and found it
redzlord
posted 3 years ago
Hey! Restoring from the back-up is big NO. You have to register as new iPhone.
Mike
posted 3 years ago
I jailbroke my old 3gs 32 GB 4.0.1 firmware, base band 5.13. 04 by jailbreakme.com then unlocked with ultrasnow. I now have a iphone4 so I'm getting ready to sell the 3gs which had no service. when I power the 3gs up I get the message "waiting for activation this may take some time" My question is if i put a t-mobile sim card with service in the 3gs will this message go away or will it even work at all. Thanks for any help.
isabelle
posted 3 years ago
any help in fixing youtube thingy???only youtube is not working???i tried to add the http:/cydia.iphoneil.net through cydia so many times but still not working???i jailbreaked using redsnow and did the unlock with the tuturial here..but to luck to make youtube works. thanks any help much appreciated..
MINH TRAN
posted 3 years ago
HELLO! OPEN CYDIA :FROM HOME PAGE LIST "More Package Sources">Then installed "iPhone Modding" > after installed iPhone Modding >installed "Push Fix" (fix push notification,wifi,you tube...) Youtube should be work back. Good Luck! my email:minhquyentran@sbcglobal.net
isabelle
posted 3 years ago
hi,thanks for ur respons,i succesfully installed iphone modding and was installing push fix but cydia got stock to "updating source" while installing the push fix thingy??..i restarted the phone and try to open youtube but still can not conect to youtube and there is one update from cydia and if i open it,its the updating source page that got stock??any help again???once again thank you very much..
erikjohn
posted 3 years ago
ma'am isabelle, na unlock nyo din ba ang phone mo after mo ma.JB? [using ultrasnow?]
isabelle
posted 3 years ago
yes po na unclock ko din sya,no hazzle,just simply fallow the direction here..i am a t-mobile right now and i am only having problem with youtube,i cant make it work,maybe i just need to do the process again:)
erikjohn
posted 3 years ago
ok po.. salamat.. you update you phone to 4.0 or 4.01??
isabelle
posted 3 years ago
updated to 4.0.1 but when u making jailbreak and ask for correct firmware click 4.0 instead of 4.0.1..hope that help:)
erikjohn
posted 3 years ago
Thanks po.. How about the existing song and apps?? d ba ma.erase??
isabelle
posted 3 years ago
everything will be del,songs,apps,contacts,picture,as in it will be like a new one,kaya before mo gawin ay make sure u sync and back up ur phone thru itunes para pagkatapos mo eh sync mo lang sa itunes (sync as an old one not a new one):).. i just did it too to my friends iphone and they dont have any problem with youtube as in everything is alright i just dont know why yung youtube ko di gumagana thats why i am planning to do the whole process again i just dont have enough time right now to do it again..
thuta
posted 3 years ago
I just jail broken my brand new phone 3gs 32 GB 4.0.1 firmware, base band 5.13. 04 by jailbreakme.com then unlocked with ultrasnow ,it took about 5 minutes to complete my phone work like charm , only 1 prolem when turn the phone off , then turn back on ,then will see the long line a little bit second , I already try hit the reset net work setting,but cant not fix it , but the phone all the funtion work great , thanks thanks you so much comex
erikjohn
posted 3 years ago
I have a 3GS running 3.1.3 / 05.12.01 model MC136LL and was JB before and unlock using "SPIRIT"... It was locked before to AT&T and now I'm using a local network provider from the Philippines..I want to update it to OS 4.01.. Will this tutorial on "jailbreakme" and "ultrasnow" work? Anyone please.. Thanks..!!!
isabelle
posted 3 years ago
yup.magwowork po sya,u can update it to os4 kaya lang it seems to be mabagal and keep on crashing..3g po sa akin ,kakaupdate ko lang po last time using this tuturial..and as of now i am still trying to work on youtube kasi po di gumagana ..yung lang po and nice to see here a kababayan..
thuta
posted 3 years ago
hi erikjohn, you stay outside us , dont do up date your phone , because you dont have at&t sim card to reactivate your phone ,
erikjohn
posted 3 years ago
Salamat Isabelle... May mga friends kasi ako na ng.update lng 3GS nla pro they haven't tried unlocking it.. nko lock sila sa Globe.. I know 'jailbreakme' will work pero d ko alam kung ultrasnow mg.wowork.. i.try ko cya pag.may time tlaga ako.. salamat kabayan... ingatz..
carlos
posted 3 years ago
I have an iPhone 4. Jailbreak went fine, i downloaded ultrasn0w and I cut 2 different sim cards to make a microsim from t-mobile, but the iphone4 says NO SIM, any suggestions or ideas? I had to call t-mobile to activate my sim cards both times
MINH TRAN
posted 3 years ago
Hello! when you pull sim in iphone 4 need repiar the sim with tray sim " how to fix to tray with sim and carefully pull sim in the iphone 4.After that iphone 4 will be work.Good luck. my email:minhquyentran@sbcglobal.net
Vinh Le
posted 3 years ago
I am having the same problem, I jail break the phone and then unlock with ultrasnow and when I put in my tmobile sim, the phone said to sim card installed. Please help.
joy
posted 3 years ago
turn off ur 3g on ur iphone n then turn ur device off insert ur sim n then turn it on it shud work
kyle
posted 3 years ago
did you find any fixes???
Krishna Menon
posted 3 years ago
Many Many Thanks Dev Team!! I am able to successfully jailbreak and unlock my locked iPhone 3GS after 7 months. :D
Shasudi
posted 3 years ago
Hi Krishna, I have one iphone 3GS with OS 4.01 locked. I don't know how to activate/unlock. Can you help me. Without activating, how can I unlock it ?
panimalar
posted 11 months ago
Hi Shasudi whether you want to unlock your Iphone 3gs from network lock ..Then have a look at sites like Unlocking4u.com here they unlock iphone permanently using remote unlocking service for affordable cost ....
Arther Tiong
posted 3 years ago
I have unlocked my iPhone 4 using Ultrasnow, but when i put in a different sim, it says different sim detected and asks me to connect to itunes. But when i plug it in, itunes says that the sim is unsupported. Any ideas? Thanks!
hashem
posted 3 years ago
i have the same problem any help?
dave
posted 3 years ago
Hi, I've been experiencing the same problem and been restoring my iPhone for more than 5 times now, still seeing the message. Following the iPhone Activation Without Original SIM Guide doesn't apply to all iPhones, and I dunno why, but now I get my phone working well. See below. Use redsn0w from iPhone dev team. 1. Restore your iPhone to 4.0.1 from iTunes. 2. Use redsn0w by pointing to the fw 4.0, not 4.0.1 (this will hactivate your iPhone) then you don't need to activate from iTunes anymore. So you need to have both fw 4.0 and fw 4.0.1 in place to do. 3. Go to Cydia, let it update the necessaries. Sometimes, it's a must to update things before you can do other things. Reboot, if required. *** If you're on T-Mobile USA, disable 3G. 4. Go to Cydia again, add repo666.ultrasn0w.com, install ultrasn0w, reboot. This will allow you to use any carrier SIM. Bravo!!! hope this helps you and others as well who experience "different SIM detected please connect to iTunes...." Googled and found one interesting topic. Hard reset your iPhone twice if you think your iPhone 3G works way too slow. Dave From Cambodia iPhone 3G 8GB, FW 4.0.1; iTunes 9.2; Redsn0w_win_0.9.5b5-5.
Chamila
posted 3 years ago
I had same issue when inserting my SIM for my 3GS here in Sri Lanka. After following the instruction in hte following url i was able to fix the issue. _http://forum.gsmhosting.com/vbb/f456/iphone-different-sim-detected-connect-itunes-after-unlock-solution-100-a-1034504/index9.html#post6175188
hashem
posted 3 years ago
thx man this link is nice it worked perfect
mark
posted 3 years ago
Important Trouble Shooting. Update 06-08-2010 Fix the "THE SIM CARD INSERTED IN THIS IPHONE DOES NOT APPEAR TO BE SUPPORTED" problem itunes have made some changes to block unlocking of iphones on 06th august 2010, and will lockdown the iphone to use only original sim even if jailbroken and unlocked via jailbreakme and ultrasn0w. If you dont have one already get an activation sim from http://www.fonefunshop.co.uk/cable_picker/94917_iPhone_Activation_Sim_Card.html remember, the activation sim is only to activate and get you past the "slide for emergency" and give "slide to unlock" we have uploaded a full guide to our servers, you will find it at http://www.fonefunshop.co.uk/simhelp.zip this help file will show you how to activate it, jailbreak and unlock, it pays special attention to the problem created by itunes update today that is blocking access to the phone even when unlocked.
Arther Tiong
posted 3 years ago
Did you use it on an iPhone 3GS or iPhone 4? Because im using an iPhone 4 and it doesnt work. Same thing still happens
Arther Tiong
posted 3 years ago
Hey guys. follow this link. it works http://www.redmondpie.com/fix-different-sim-detected-emergency-mode-problem-in-iphone-4-3gs-3g-after-jailbreaking-with-jailbreakme/ although i cant seem to get facetime to work. any ideas
Adil Ramadan
posted 3 years ago
I have the same problem. I found a method from the net but it seems there is no way to unlock it. http://forum.gsmhosting.com/vbb/f456/easy-way-solve-diff-sim-detected-emergency-mode-after-jailbreak-1065255/
Chamila
posted 3 years ago
Same steps in the link I mentioned above ...
Tai
posted 3 years ago
u the best dev team
Pedja
posted 3 years ago
After instaling 4.0.1 I found my phone doesnt turning on light after finishing call. And I cant activate any function. Must press switch off button to light it again. Is it software or phone malfunction?
Ibrahim
posted 3 years ago
After unlocking my iphone 4, I can't fet the 3g!!!! Anyone facing the same problem? I purchased a microsim card and I'm not sure if that is the problem
Ash Patel
posted 3 years ago
Will the unlock work on any version of the iphone 3GS and on any baseband?
Jean-Mathieu
posted 3 years ago
Thank you Dev-Team!!!
Ash Patel
posted 3 years ago
I have an iphone 3gs 4.0 and it is locked to o2. Do i have to have an o2 sim card inserted when unlocking using ultrasn0w? or do i not need to put a sim card in? Please helpp me..
JB
posted 3 years ago
You dont need a sim card inserted when doing this.
Ash Patel
posted 3 years ago
Will the unlock work on any version of the iphone 3GS? including the latest version?
Fernanda
posted 3 years ago
Thanks, DevTeam! This is a great moment for me - after having had a new bootrom iphone with a tethered jailbreak for almost a year! And never being able to restart it unless I had a computer... It's an amazing feeling! You guys rock! Thank you for providing a service which provides an inalienable right - to use your iphone with the damn carrier you want where you want!
Faisal
posted 3 years ago
Thank You Dev-Team
António Fernandes
posted 3 years ago
my iphone 4 jb and unlocked is getting massive battery drain, is it just me or is this normal, have all push services and fetch off, only 3g on, full charge and lost 30% in standby whitout receiving calls, just watching time to time anyone whit this ?
Ibrahim
posted 3 years ago
I have got the same problem. The battery gets drain too fast. I could not find where the problem is.
António Fernandes
posted 3 years ago
update: my batery lasted less than 24h, incredible, lets all night long in standby droped from 25% to 6% in standy, the 3gs could loose 3/4 % max, something is wrong, yesterday lost 30% in one afternoon whitout receving calls, did almost nothing the iphone also is overheating easly
chriskat
posted 3 years ago
The best thing to do is restore your firmware back to the stock apple firmware and see if the problem persists, if it does then it is most likely a hardware problem! and you should contact apple
Manikandan
posted 3 years ago
it is because of multitasking... u must close unwanted apps running in background. To close apps running in background, double click the home button. it shows the apps running in bg... just long tap it... it shows redminus simble, tap it to close that apps... gud luck
innovative
posted 5 months ago
There are a lot of techniques available to unlock iphone 4 : 1. By using unlocking software like cydia 2. Imei unlocking method 3. To unlock iphone from service provider 4. By using Remote unlocking service which is available at TheUnlockSpot.com
kgiovanny
posted 3 years ago
I did the procedure and it worked properly. on Note however that some calls are being lost, they go straight to voice mail iphone 4 baseband 01.59 firmware 4.0.1
happypanny
posted 3 years ago
anyone knows what to do with t-mobile to get internet back. right now when i go to the settings, cellular data will not allow me to go in and type the web address, only able to turn on/off the cellular data. any info will help. thank you much
kgiovanny
posted 3 years ago
I did the procedure and it worked properly. Note however that some calls are being lost, they go straight to voice mail
Roland
posted 3 years ago
I have an iPhone 3GS, JB with Blackra1n: OS: 3.1.2, Baseband: 05.07.11. Don't have original AT&T Sim available. Current iTunes installed 9.1. What are the correct steps to: - Upgrade to iOS4 - Jailbreak with JailbreakME and - Unlock It Please please help :)
Valdez
posted 3 years ago
Update itunes, backup phone, update to IOS 4, then use jailbreakme.com to JB. Follow the instructions here to unlock...
kevin
posted 3 years ago
for t-mobile on iphone 4, no need to turn off 3G :)
Tzoq
posted 3 years ago
Thanks to the Dev Team for their great and highly appreciated work.
GBF
posted 3 years ago
HELP!!! People I need some HELP. I bought the iPhone 4 from someone who did not activate the phone yet. I want to jailbreak but the only way to do so is to gain access to safari on the phone but for now its only showing the itunes logo. When I lug into itunes its asking for the billing zip code and the last four digits of a social security number which I dont have. Is there a way to gain access other than the phonebook sim card because I cannot access them anywhere??? Please let me know.. Thanks
Scott
posted 3 years ago
I had the same problem, after hours on the line with att and apple they could not resolve the issue. I finally said screw it and took it to the apple store and got a warranty replacement, they didn't even question it. I would try that!
GBF
posted 3 years ago
The only thing is I am not anywhere close to an apple store. And there is no way I can get close to one at the moment. Thanks for your suggestion though.
Mike
posted 3 years ago
Find a sim card thats been activated. When done put the old one back in.
GBF
posted 3 years ago
Thanks for your suggestion but I tried that already and had no luck. Are you sure that worked on the iphone 4?
GBF
posted 3 years ago
Hi Scott quick question would you be able to give me a ball by ball rundown of your visit to apple for exchange. Thanks very much
iyas
posted 3 years ago
just wondering the people that unlocked their iphone 4 to tmobile...by anychance what did u guys do for ur simcard??
thinkgreen216
posted 3 years ago
Some people are cutting their sim cards with razor blades or scissors. I actually purchased a micro sim cutter from the web at microsim-cutter.com It also came with some adapters in it so if I want to make my sim a regular size it just fits inside the adapter.
Ryan Brenna
posted 3 years ago
I cut mine. It worked just fine. I would probably go with the cutter/adapter route though.
kevin
posted 3 years ago
just cut it, mine works fine, and don't have to turn off 3G
happypanny77
posted 3 years ago
so do you get 3g or the edge network even if we don't have to turn off 3g?
joy
posted 3 years ago
thxxxxxxx am the most happiest man on earn,just bought the famous iphone4 on 4.0.1 n firmware 0.1.59.00 n i jailbreak it work fine n use ultrasn0w to unlock n tht it got full signal bar it work perfect a big thx to the dev-team thxxxx
wintekid87
posted 3 years ago
When I upgraded my 3GS to the latest release I lost all network data ability. There isn't even an option to enter the network settings any longer. When happened? Help.
me
posted 3 years ago
do u have simcard in the phone? cause if u don't have simcard in the phone network settings button doesnt show up
winterkid87
posted 3 years ago
yes, I have the same t-mobile card in it that was in before the update.
me
posted 3 years ago
add sinfuliphonerepo.com source and install enable tethering for tmobile or something like that. and it will show up. but make sure not to install tmobile mms and data settings one cause it's not compatible with 4.0 yet. and before u do that first remove the sim reset network settings and put sim card in n see if it shows up if it doesnt than try the above method.
wintekid87
posted 3 years ago
Still nothing. What I have done: 1. Removed sim, rebooted, put sim back and reset network settings; 2. Also added the MMS and Tethering fix for TMobile from sinfuliphonerepo.com. There is still no place to enter network settings. Any other ideas?
winterkid87
posted 3 years ago
I just noticed there isn't even an Airplane mode. Should I update to 4.01 and try to unlock? Or is that possible yet?
me
posted 3 years ago
wow thats the only two things i can think of. cause same thing happened to me too. n i just did the simcard thing n it showed up. just to be clear u r talking about the "network settings" button that give u option to put tmobile apn settings and stuff like that correct?
me
posted 3 years ago
yea if you don't have airplane mode switch than something is wrong. don't do the update. do the restore.
winterkid87
posted 3 years ago
I tried restore too. What if I use the "erase data and settings" and do a fresh JB and unlock? Will that mess things up?
me
posted 3 years ago
well the thing about erase data and settings with jailbroken iphone is that it will be stuck in apple logo loop and than u'll have to restore anyways. so just do the restore and do the fresh jailbreak and insert the sim after jb and unlock is done.
winterkid87
posted 3 years ago
Ok, my AT&T sim is not with me so I'll try it tonight from scratch. I swore I'd never update my Cydia again for the reason. Guess I should have listened to my own advice.
me
posted 3 years ago
ok let me know how it goes
winterkid87
posted 3 years ago
I chickened out on the complete restore because the only thing missing is MMS. I see that I'm not alone with the issue due to the latest ultrasn0w update as other t-mobile users are reporting the same problem. Too bad one "fix" ended up leading to another. I'm just grateful to the team for helping us all out. With all this talent, I'm confident someone will find a fix for 4.0 users with no MMS. If I find something that I trust, I'll post it here. Thanks for the help.
me
posted 3 years ago
there is a fix for 4.0 mms u just have to add a repo and download 4.0 mms fix. and it works badass. http://beta.leimobile.com/repo/ just add this repo and install 4.0 mms fix
winterkid87
posted 3 years ago
I ended up just using SwirlyMMS. Should I ditch that and install the repo you mentioned? When I tried to add it Cydia said it was overwriting something I got from sinfuliphone and wouldn't let me install the one you said to use. Do I delete that too?
winterkid87
posted 3 years ago
ok, so i uninstalled the sinfuliphone thing and added leimoble's fix. It still doens't show up, but like I said it works with SwirlyMMS. I'll stick with that and call it a day. Its worth the $12 to move on. Thanks a BUNCH!!!!!! I appreciate your time and help.
me
posted 3 years ago
yea after i jailbroke my 4.0.1 thats what i used cause i like stock mms better than swirly. but it's up to u
me
posted 3 years ago
no prob
Arron
posted 3 years ago
Will this unlock work with IPHONE 3GS ON 4.0 NEW BOOTROM 05/12/01, i assume it does just wanted to make sure?
stephen
posted 3 years ago
I want to know the same thing: what is the jailbreak and unlock that will work for iphone 3GS on 4.0.1 model MC137LL and Modem firmware 05.13.04
wezz69
posted 3 years ago
Before you can follow these instructions you must have a jailbroken iPhone and you must be on the 04.26.08, 05.11.07, 05.12.01, 05.13.04, or 01.59 baseband(modem firmware).
Arron
posted 3 years ago
I understand that but have any of you guys had any reported problems yet? after its been jailbroken?
panimalar
posted 11 months ago
Hi Arron i dont know that whether the untrasnow will unlock your iphone 3gs from network lock or not..But i suggest you to have a look at sites like Theunlockspot.com here they sure unlock your iphone 3gs permanently from network lock using remote unlocking service for affordable cost ...
schandalz
posted 3 years ago
if i'm not save my shsh is there possible to unlock??
Boecc
posted 3 years ago
Wow ... that was easy unlocking for my iPhone 4 . Thank you dev team .... :)
manmenhk2002
posted 3 years ago
Hi guys, I was kinda stuck during the process of the unlocking and not quite sure if it was succeed, and i don have any sim card of other cariers. DO you guys know if anyways i can test about it without using simcard? thanks
manmenhk2002
posted 3 years ago
Hi guys, I was kinda in stuck during the process of the unlocking and not quite sure if it was succeed, and i don have any sim card of other cariers. DO you guys know if anyways i can test about it without using simcard? thanks
alegazzola
posted 3 years ago
Hi, I added another time the repo and it work formme refreshing the ultrasnow to the last version
riconster
posted 3 years ago
How to Set iPhone 4 APN http://www.powercx.com/iblog/?p=937
Joe
posted 3 years ago
Im on an iPhone 4 4.0.1 when I add the URL in cydia I only get the older version of ultrasn0w version 0.93 what am I doing wrong??
Tony
posted 3 years ago
i jailbroke my iphone 4 and now it will not turn on, the jailbreak worked cydia was installed and updated after that i downloaded my3g it said my phone needed to reset and now i cant turn it on?.... any thoughts? i cant put it in DFU mode either....
Joe
posted 3 years ago
tony, I myslef as well can not unlock the iPhone 4. I keep getting the older version of the ultrasn0w verison 0.93.
two4
posted 3 years ago
just keep trying to get it in DFU mode... you will be able to do that and then just restore it. I had the same problem on a older phone.
matthew
posted 3 years ago
to answer my own question and for reference for others: for those of with a t-mobile sim card and the 'searching', 'no signal' issue, it turns out my sim card was too old. i've had it since 2002 or so. today i went into a tmobile store and said my sim card no longer works and they gave me a new one, transferring my contacts to the new card. there was no charge. i didn't say i would be using it for an iphone and had them verify it on my last smartphone (t-mobile branded) to make sure the card works. and now the iphone works fine. so for those of you with the 'no signal' 'searching' problem, the issue may be the sim card.
Jessica
posted 3 years ago
Hi matthew I was just wondering how you jailbroke the phone if you are from tmobile.. where did you get the internet connection. I am trying to figure that out before I actually buy the device. thanks
Harrison
posted 3 years ago
Ok i had the "searching' and 'no service' problem on an iphone 3g but i have an iphone 2g unlocked and it works fine with the tmobile sim card. Any ideas? please help
Slcpilot
posted 3 years ago
Hey fellow TMobile users, can anyone tell me if as of this date TMobile's "web2go" internet package works on an unlocked/jailbroken 3GS with 4.0? Thanks so much!
josh
posted 3 years ago
excellent work guys!!!!!!!!!!! it perfectly works!! iphone 3gs 3.1.3 , baseband 05.12.01 new bootrom thank you again
Johnson
posted 3 years ago
Thank you for an amazing service... your things work AWESOMELY...!!! I just jailbreaked and unlocked the very last version 3GS with OS4...
yasir
posted 3 years ago
Hi guys. I just JBed my iPhone 4. I tried to download Ultrasn0w and it is stuck in download screen!! How do I get rid of this page? any suggestion?
Bilal
posted 3 years ago
@ Yasir, kindly check the spelling of snow, its, sn0w address is http://repo666.ultrasn0w.com 0 > numeric digit hope it will work for u
Yasir
posted 3 years ago
@bilal, thnx fr ur reply. Actly i wantd unlock my iPhone 4. I thnk unlock for iPhone 4 is still under devlpmnt. Salams
Pete
posted 3 years ago
How do I wipe a 3GS preserving the JB/Unlock ? I am selling my 3GS and want to wipe all the personal information. Apple says to do this using "Erase All Content and Settings" in Settings > General > Reset. But will this remove the JB/Unlock? thanks for any help Pete JB/UL Pwnage 4.01 / UltraSn0w
matthew
posted 3 years ago
i have an iphone 3g, that i bought used. i upgraded to 4.0.1, jailbroke using redsn0w but ultrasn0w just will not work. the unlock process goes fine but when i insert my tmobile sim, it just says 'waiting for activation' and after a few minutes just goes to 'no signal' in the upper left where the bars would be. i've tried downgrading to 3.13, 3.12, jailbreaking via different methods, and unlocking using blacksn0w and other methods but none of them work. what do i need to do? do i need to leave a working at&t sim in the phone while unlocking? should i have no sim while unlocking? i guess i'm stuck with the 5.13.04 baseband so ultrasn0w is the only way to unlock the phone?
matthew
posted 3 years ago
to answer my own question and for reference for others: my sim card was too old. i've had it since 2002 or so. today i went into a tmobile store and said my sim card no longer works and they gave me a new one, transferring my contacts to the new card. there was no charge. i didn't say i would be using it for an iphone and had them verify it on my last smartphone (t-mobile branded) to make sure the card works. and now the iphone works fine. so for those of you with the 'no signal' 'searching' problem, the issue may be the sim card.
blackcivic
posted 3 years ago
i am unable to connect to repo666.ultrasnow.com or repo666.ultrasn0w.com it says host is unreachable... how do i unlock
blackcivic
posted 3 years ago
i forgot to mention i'm on a iphone 3G with OS 3.1.3 on baseband 4.26
zu219r
posted 3 years ago
try repo666.ultrasn0w.org as re666.ultrasn0w.com is down. Hope this helps u :)
Blackcivic
posted 3 years ago
Thank you thank you thank you!!!! That worked
innovative
posted 4 months ago
There are a lot of techniques available to unlock iphone 3gs: 1. By using unlocking software like cydia 2. Imei unlocking method 3. To unlock iphone from service provider 4. By using Remote unlocking service which is available at OnlineGSMUnlock.com
kas23
posted 4 years ago
Besides placing a SIM into my iPhone 3G (running 3.1.2), how do I know that this unlock worked?
joao
posted 3 years ago
insert another SIM card from a different carrier, if you have att try to get a tmobile working SIM
user
posted 4 years ago
Big THANKS to the Dev-Team !!! You make my life easier !
Alex
posted 4 years ago
worked like a charm...i was on 3.1.2 and 5.11.07 on 3GS. Just did jailbreak with PWNAGE and then unlock with ultrasn02...now everything is back on new OS4.
unixes
posted 4 years ago
Really appreciate the effort.Worked from the first intent with 3.1.3(7E18) baseband 05.12.01.A huge thank from Barcelona - Spain. :)
gs31088
posted 4 years ago
is the iphone 3 gs with latest bootrom 359.3.2 Please calrify
Cyrus
posted 4 years ago
infinite thumbs up for iphone dev team!!!!!!!
Mclaren
posted 4 years ago
thaaaaaaaaaanx alot guys it worked fine :) im very happy and soon i donate to you you alwayes do a great effort.
miles
posted 4 years ago
can i unlock it without AT&T Sim card? Thanks for helping!
Tony McC
posted 4 years ago
Hi, At this point I have read most everything written about unlocking ones iPhone, but still have not been able to re-create the success of others. I have an iPhone 3G, recently updated to version 4.0 on 05.13.04 firmware from the UK. I now live in the US and have an AT&T pay & go SIM which I want to use in my iPhone, as opposed to a wee 1998-esque flip phone. I believe my versions are all correct, I have followed the tutorials here and on other sites that have a common process for jailbreaking the iPhone, installing Cydia, and then using this to run ultrasn0w to unlock my iPhone. I have repeated this, seemingly successfully, a number of times and tried the toggling of flight safe mode and rebooting. I still show 'No service' when I put my AT&T SIM in though. Could the developers, or anyone with similar experience suggest a solution so I may ditch the bat-phone for good? Many thanks for your help. Tony
zu219r
posted 4 years ago
Well my reply won't help u but i have the same problem as urs and no solution found so far :(
harry
posted 3 years ago
I have the same experience, i now live here in the US and has atnt go phone that i cannot insert to my iphone that came from the philippines. I had successfully jailbroken my iphone so many times but unlocking it doesn't seem to work. i already tried a lot of versions, downgraded to different firmwares, and tried several versions of unlocking but still it says "no service" when i insert the atnt sim card. I just wanted to share same experience.
booyakasha
posted 3 years ago
I had the same issue, turned out I had a SIM was inactive or disabled by AT&T. Try another SIM that you know 100% works on another phone and it should work fine!
Mudassir
posted 4 years ago
I can't seem to get edge to work on my unlocked iphone 3gs. Jailbreak through pwnagetool running on a VMware Mac(over windows XP) and unlocked through ultrasn0w. I've tried the SIM in other phones and it works without an issue! Any help would be appreciated.
innovative
posted 5 months ago
There are a lot of techniques available to unlock iphone 3gs : 1. By using unlocking software like cydia 2. Imei unlocking method 3. To unlock iphone from service provider 4. By using Remote unlocking service which is available at ClassicUnlocking.com
d rock
posted 4 years ago
A big thank you to all the members of the iPhone Dev-Team!
oy oso
posted 4 years ago
I've successfully jb'd my phone three times since the 4.0 update, i've run ultrasn0w i don't know how many times, and i keep getting inconsistent phone service. I can only make about 10% of my calls and use the internet about the same amount. Most of the time i get a call for about 30 seconds and it goes out. This is my first attempt at jailbreaking and unlocking my phone, however i've followed the tutorials word for word, and it still doesn't seem to work perfectly. obiwan i know you're out there, I live in the US and use tmobile, anyone have a successful unlock sans connection issues?
kike
posted 4 years ago
The repo666.ultrasn0w.com does not work!!! so it is useless.
Bilal
posted 3 years ago
enter full address http://repo666.ultrasn0w.com regards, Bilal
james
posted 4 years ago
hey, i have a 3gs new bootrom running on 3.1.3 and 05.12.01 bb, i jailbroke it with spirit when it was first realeased but didn't get to unlock it till ultrasn0w 0.93 realeased but i did it, and my iphone worked fine until about a day ago when i started getting the "No SIM" message. the weird thing is, it was going from "No SIM" one hour, and maybe another hour it reads the simcard, from t-mobile. now, sometimes i can get service back by turning the device off and on or respringing winterboard, but it seems that that is starting to not work. is anyone else running into this problem? and what can i do to fix this? tl:dr my iphone 3gs was unlocked using the above program but now keeps saying "No SIM" and no service, what can i do?
zizi
posted 4 years ago
Just wanted to say thanks - the tutorials were awesome, and I can now use my American iphone in Deutschland!
Jmarsh
posted 3 years ago
I just got to germany and im going to try and jailbreak and unlock my phone tonight and put a vodafone sim card in it. that should work right?? if not please offer some advice and if it does fail i will be sending you a msg on how you were successful.
Rahul
posted 4 years ago
hi..... i have been using my iphone in india on an airtel network and i have bought the iphone form the grey market.... can i still do the unlock using the same unofficial airtel simcard. or do i need the official at&t simcard to do it? plz help thanks in advance
Rahul
posted 4 years ago
i mean will i we able to use gprs on the unofficial sim card
apple
posted 4 years ago
hi..i have iphone 3gs..3.1.3 and baseband 5.12.01..i jailbreak it few month ago using spirit..can I still use this method??help plz~~
unixes
posted 4 years ago
Hi. I just bought a new iPhone 3GS 32GB.Activate it and in the next minute i jailbreak it using Spirit.Then ultrasnow to unlock it.Everything worked perfect.No errors,no problems.So i don't doubt that you can't do it.
Hitesh Girdhar
posted 4 years ago
Thanks a tonne... Quite easy process... and yeah, the visuals helped a lot...
Chico
posted 4 years ago
I followed the steps to jailbreak and unlock my iphone 3g to firmware 3.1.3. When i installed ultransn0w, it wont read my tmobile sim card. It would keep saying, "No service". I need some help. Never experienced this issue before. Thanks!
satz
posted 4 years ago
Excellent post.. quite easy to follow and it made my life simple.. thanks!! satz
gabriel
posted 4 years ago
is this working on 3gs new bootrom?
pogues13
posted 4 years ago
It is not working on the new bootrom yet. I tried on my 3GS. Mine does not have the letters in front of the serial number so I went for it. After it didn't work, I was told that the new bootrom did not necessarily have the letters in front of the serial number. You can tell by checking the year and week. The third number in the serial number is the year and the 4th and 5th numbers are the week. If it is after week 40, it is most likely new. Before week 40, possibly not.
gs31088
posted 4 years ago
Will it work for Iphone 3Gs 3.1.3 Firmware 05.12.01 New Bootroom 359.3.2 ?
carlos
posted 3 years ago
yes it does work on new bootrom for 3gs. I updated to 4.0.1 and was successful at jailbreaking and unlocking for t-mobile
dsa
posted 4 years ago
Need an assist from anyone willing to help. I have an iPhone 3GS, 3.1.3, 5.12.01 bb. I moved out of the country and canceled my subscription with AT&T. I have successfully jailbroken my phone using Spirit. However, because I have no internet connection, I am unable to connect in Cydia to download Ultrasn0W. I get a "Unable to Load, Can't connect to host" message. My WiFi is inop as well - will not connect me to the internet or anything else, even with the phone sitting on top of the wireless router. Is there a way to install Ultrasn0w without going through Cydia? Is there a reason my WiFi no longer works on my phone? Any help is much appreciated. Thanks.
Vicky
posted 4 years ago
I too am facing the same issue, but I was facing this WiFi issue even before I jailbroke my iphone only yesterday. My iphone is 3GS with 3.1.3 firmware on new bootrom. I jailbroke it using Spirit. This WiFi issue started a week back. Along with it all my already installed apps from Apple store are not working. They just blink and go back. I would appreciate any help on this. Thanks in advance.
Ty Phan
posted 4 years ago
It worked this time for me. Jailedbreak phone with Firmware 05.12.01. version 3.1.3. For those who has a problem to unlock with jailedbreak phone, from my own problem, i think before running UltraSn0w, you might need to have an activate sim card inserted in the phone first, and also turn off wifi option. My own unlock problem on a first try about 3 week ago is that I had a deactived (terminated contract) sim card from O2 (UK) in the phone, with wifi option On. The phone was not even reboot after complete stage. My iPphone was just shown Apple logo after power button pressed. I only see the Apple logo when pressed the power button many times. The phone was then taken to the local repair shop to reboot. It costs £15 to do so thought.
steven singh
posted 4 years ago
the url does not work amd i need to unlck muy baseband i have a iphone 3g 3.1.3firmware
Jeeves
posted 4 years ago
have a question, thanks for your time reviewing and reponding- I have 3gs 16gb, Version 3.1.2(7D11)Firmware 05.11.07. I am going to try to jailbreak and unlock and have couple of ?s 1. Should I do a backup so that in case something goes wrong with the jailbreak/unlock I can restore back to 3.1.2, 05.11.07 instead of ending up having to upgrade to 3.1.3 which right now does not have an unlock? Or to even help after the unlock sometime in the future? 2. if yes, what and how do I do this backup (sorry but this is my first with a iphone I bought second hand) 3. The 3rd 4th and 5th digit are 938 for one phone and 002 for the second phone). Version 3.1.2(7D11)Firmware 05.11.07. Can I jailbreak using redsnow and then unlock using ultrasnow. The tuturials on the iclarified website had only 3 combinations listed (blackrain & blacksnow or redsnow & blacksnow or spirit & ultrasnow)
Yoyo
posted 4 years ago
It worked..... I jailbreaked my iphone 3gs with spirint and unlocked with ultrasnow0.93. Thanks dev team..!
pogues13
posted 4 years ago
I just did an update to the newest iOS 4 via iTunes on my 3G (ATT). I had to do the restore 4-5 times before it would stick. Don't know why. After a few times, it stuck and worked great. I then unlocked it with ultrasn0w and put my t-mobile SIM card in...voila!!! It worked great. Thanks for everything. Just know that if it doesn't work the first time, try again. It took me 4-5 times for it to work.
pogues13
posted 4 years ago
I was successful with the 3G, but the 3Gs had the new bootrom. Sucks, cuz that was the one I use. Can't wait for the new 3GS jailbreak now.
Amin
posted 4 years ago
i bought an iphone 3g from on of friends but it not actived i restore it by iOs 4.0 and now modem firmware is 5.13.4 jailbreaked with redsnow and unlock with ultrasn0w .93 but still have problem with antenna and it say ''waiting for activate'' i'm in Iran and my operator is MTN i disabled 3g ,culler data,... and reinstall redsnow but still have problem how can i find that the problem is softeare problem or hardware ? pls help me
nicko yoo
posted 4 years ago
hi team.. please reply.. do it work for my iphone 3g 3.1.3 (7E18) baseband 05.12.01.. it success jailbreak but i cant how to unlock.. do this tutorial with ultrasnow it work?? thanks before
zain
posted 4 years ago
Hi, i did hi i added blackra1n.com in repositories then installed blacksnow as it was ment to unlock my i phone 3gs 3.1.3 but in stead its know stuck on the apple logo could you please help me thanks
innovative
posted 1 month ago
muhammad tariq - August 12, 2011 at 9:44pm please help me to unlock and jailbreak 3gs with firmware 06.15.00 and have present version 4.2.1 To unlock your iPhone3gs,. use Remote unlocking method . you can get it from any of the online vendors like ProUnlocking.com to unlock it . It doesn't requires jailbreaking .
Indga
posted 4 years ago
How to unlock your iPhone on a Mac if you can't connect to UltraSn0w in Cydia or at sinfuliphonerepo.com: 1. Download mobilesubstrate_0.9.3209-1_iphoneos-arm.deb 22-Jun-2010 03:17 (or whatever's the latest version) at http://apt.saurik.com/debs/. 2. Go to http://repo666.ultrasn0w.com/ultrasn0w.deb to download ultrasn0w. 3. Download iPhone Explorer, hook up the phone via USB and open iPhone Explorer. 4. In the root folder, go here: Root/var/root/Media/Cydia/AutoInstall and place the two .deb files in there. 5. Go to Cydia, search and download AF2CADD. 6. When the installation is finished, AF2CADD will reboot and restart your iPhone in an unlocked state. This is for Mac users only. You don't need Cyder II, you just need basic Mac programs to do this. This workaround is an adaptation of steps I found here: http://xsellize.com/topic/30700-ultrasnow-upgrade-09-3/. I have an iPhone 3G, 5.11.07, running 4.0, 16GB, jailbroken with PwnageTool, now unlocked with ultrasn0w 0.93, and it's working fine. P.S. This is also how I unlocked my iPhone using blacksn0w. P.P.S. I didn't brick my iPhone doing this; if you brick yours, restore and start over with Pwnage Tool.
indga
posted 4 years ago
One more thing, you might want to reboot before installing AF2CADD. That takes the .deb files out of the AutoInstall folder. Then install the AF2CADD and restart.